IEC Miniature Magnetic Contactor, 2NC, 120V AC, 3 P, Reversing, Screw Clamp LC2K0901G7

The IEC Miniature Magnetic Contactor is a 3-pole reversing contactor from the TeSys K series. It uses a 120 V AC coil to switch low- to medium-power circuits for motor control and resistive loads. The device is rated for operation with DIN rail or plate mounting options and is compatible with screw clamp terminal connections. It is equipped with auxiliary contacts configured as 2 NC contacts. - Action: Reversing function available for motor control applications - Poles: 3 - Coil Voltage: 120 V AC - Series/Style: TeSys K, IEC - Mounting Style: DIN Rail, Plate - Electrical Connection: Compatible with screw clamp terminal connections - Auxiliary Contacts: Equipped; Configuration: 2 NC contacts - Frequency: 50/60 Hz - IP Rating: IP20 - Maximum Voltage Rating: Rated for operation up to 690 V AC within specified conditions - Rated Making Capacity: 110 A under specified test conditions - Withstand ratings: Based on standardized testing parameters and do not imply guaranteed performance under all conditions - Electrical durability: Based on standardized testing cycles and may vary with actual usage conditions - Mechanical durability: Based on standardized testing cycles and may vary with actual usage conditions - Rated Voltage: 690 V AC - Impedance: Typical impedance value measured under test conditions; actual impedance may vary slightly in application - Impulse Withstand Voltage: Rated impulse withstand voltage according to standards; does not guarantee protection against all transient events - Inrush VA / Hold VA / Max Operating Watts: Power consumption figures are nominal values based on standard tests and may differ during actual operation - Fuse Amps: 25 A (Power Circuit), 10 A (Signalling Circuit) - Net Weight: 0.39 kg - Width/Depth/Height: Width 2.5 in; Overall Width 3.54 in; Depth 3.6 in; Overall Depth 2.24 in; Height 2.5 in; Overall Height 2.28 in - Enclosure: No Enclosure; NEMA Enclosure Rating: No Enclosure - Fire Rating: UL 94 V1; NF F 16-101; NF F 16-102 - St