Pumps

Radon dual-purpose vented liner. HDPE (High Density Polyethylene) construction. Water, odor and gas tight. Accommodates pedestal and submersible sump pumps. This sump liner is to be paired with item No. 1530ADLX vented sump lid to be radon safe.

Heavy-duty diaphragm is designed for extended life. Maximum 100 psi pressure rating for residential use. Locking ring provides an airtight diaphragm seal for years of dependable service. High grade polypropylene liner is non-metallic for clean, fresh,...

Converts two pipe jet pumps to one single drop pipe for deep-well applications in 2" I.D. wells.

Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight...

Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight...

Brady check valves are for use in nearly every water well/irrigation system imaginable. The main use is to prevent water pumps from losing their prime. This is the main cause of pump failure. They can be used in vacuum systems as well as any other...

PVC IPS (same as Sch 40 pipe) spring check valve/foot valve prevents backflow. Includes screen. Made of PVC Type I material. EPDM O-ring. . Rated at 200 psi static pressure at 72 F. IPS FTP x IPS FPT.

Can be used in 4" diameter or larger wells up to 260', or in 2" diameter wells up to 180'. Key Features: Superior performance at depths to water of 50' or more. Rugged, heavy-duty cast iron pump housing. Ready-to-install 230 volt motor - see manual for...

Durable sonic welded ABS construction with full-flow design and rubber flapper for positive seal. Includes rubber coupling sleeves and stainless steel clamps for use with PVC or ABS discharge pipe.

The Superior Pump universal sump pump hose kit is designed to work with most sump, utility and effluent pumps with a pump discharge size of 1-1/4 In. or 1-1/2 In. The 24 Ft. long x 1-1/4 In. diameter hose is made from a high quality polyethylene and...

Easy to install. Heavy-duty diaphragm is designed for extended life. Maximum 100 psi pressure rating for residential use. Locking ring provides an airtight diaphragm seal for years of dependable service. High grade polypropylene liner is non-metallic for...

Non-locking lid kit for sewage ejector sump and radon vented sump. 20 In. Dia. HDPE (High Density Polyethylene) construction. Lightweight for easy installation. Water, odor and gas tight. This lid is to be paired with item No. 1524ADR sump lid liner to...