Osg

Thread Forming Tap, Thread Size M18x2.5, Metric, Overall Length 125 mm, Cobalt, TiCN, Right Hand, Thread Length 25 mm, 75 Percent Thread Drill Size 16.75 mm, Thread Limit D12, Tap Length Standard DIN

Screw Machine Drill Bit, Drill Bit Size 13 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, WXL, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.5118

Screw Machine Drill Bit, Drill Bit Size 9.7 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, WXL, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.3819

Flat Bottom Drill Bit, Drill Bit Size 3.8 mm, 180 Degrees Drill Bit Point Angle, Flat-Bottom, Carbide, EgiAs

Micro Drill Bit, Drill Bit Size 3.62 mm, Drill Bit Point Angle 140 Degrees , 4 Facet Point, Carbide, TiAlN, +0.000 mm/-0.010 mm, Spiral, 30 Degrees , High Performance

Screw Machine Drill Bit, Drill Bit Size #3, Drill Bit Point Angle 140 Degrees , X Thinning Point, Carbide, EgiAs, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.2130

Round Threading Die, Round, Thread Size 1 In.-12, UNF, Solid, Outside Dia. 3 in, Die Material High Speed Steel, Thread Direction Right Hand, Die Thickness 1 in, Finish - Machining Bright (Uncoated)

Square End Mill, 1 in Milling Dia., Carbide, Uncoated, Non-Coolant Through, Straight, Length of 3 in, Overall Length 6 in, Shank Dia. 1 in, Neck Dia. Not Applicable

Square End Mill, 0.9 mm Milling Dia., Carbide, WXL, Straight, Length of 1.35 mm, Overall Length 45 mm, Shank Dia. 4 mm

Square End Mill, 0.09375 in Milling Dia., Carbide, Diamond, Non-Coolant Through, Straight, Length of 0.09375 in, Overall Length 3 in, Shank Dia. 3/32 in, Neck Dia. 0.089 in

Chucking Reamer, Carbide, Bright (Uncoated), Straight, Metric, 5.54 mm

Straight Flute Drill Bit, Drill Bit Size 4.86 mm, 120 Degrees Drill Bit Point Angle, Material - Machining Carbide, Decimal Equivalent 0.1913, Metric, X Thinning Point Drill Bit Point Type, Flute...