IEC Magnetic Contactor, 1NC-1NO, 208V AC, 3 P, Non-Reversing, Screw Clamp LC1D12LE7

- The item is an IEC Magnetic Contactor (3-pole, non-reversing) from the TeSys Deca series. - It uses a 208 V AC coil to switch power circuits and includes auxiliary contacts as specified; actual performance may vary based on application. - Rated for operation with motor control and resistive loads within specified parameters; uses screw clamp terminals; no built-in surge suppressor or enclosure. - It is rated for operation within the specified voltage and frequency ranges and can be mounted on DIN rails or plates. - Action: Non-Reversing - Phase/Poles: Three-phase, 3 poles - Coil Voltage: 208 V AC - Auxiliary contacts: includes auxiliary contacts as specified; actual performance may vary based on application - Electrical ratings: Maximum voltage 690 V AC; Rated making capacity 250 A @ 440 V (Power Circuit); 140 A (AC Signalling); 250 A (DC Signalling) - Full Load Amps: 12 A inductive; 25 A resistive - Durability: durability ratings are based on testing conditions; actual lifespan may vary depending on usage - IP/Enclosure: IP20; No Enclosure - Mounting/Terminals: DIN Rail, Plate mounting; Screw Clamp terminals - Dimensions/Weight: Depth 3.38 in; Height 3.03 in; Width 1.77 in; Net Weight 0.325 kg - Series: TeSys Deca - Operating times: typical switching times under test conditions; actual response time may vary - Impulse withstand: impulse withstand voltage as tested under specific standards; does not imply immunity from all transient events - Includes: Auxiliary Contacts Yes; Protective Cover Yes - Shock resistance: 15 G (Closed); 10 G (Open) - Standards: BV, CCC, CSA, CSA C22.2 No 14, DNV, EN 60947-4-1, EN 60947-5-1, GL, GOST, IEC 60335-1, IEC 60947-4-1, IEC 60947-5-1, LROS, RINA, UKCA, UL 508, UL Listed - Frequency: 50/60 Hz - Maximum Operating Temperature: 140 Degrees F