Brake Tire and Suspension

Brake Clevis Pin Press Tool is designed to shear off the cotter pin, or the cotter pin can be ground off. .Works on most models of automatic slack adjuster rod pins found on class 6-8 trucks and equipment. 41850

Brake Clevis Pin Press Removing corroded clevis pins from a brake air-chamber pushrod can be a maddening and time-consuming task— unless you’re using our clevis pin press. This handy screwoperated tool applies the force just where it’s needed. The pin is...

Brake Cylinder Flex Hone- 10mm, 180 Grit A resilient, flexible honing tool with a soft cutting action.. The abrasive globules each have independent suspension that assures the Flex-Hone to be self-centering, self-aligning to the bore, and...

Brake Cylinder Hone Brake cylinder hone with three 240 grit stones fits cylinders from 27/32 to 2. Flexible shaft designed to be driven by variable speed drill.. Controlled pressure makes it possible to polish or hone with just one stone grit. . Stones...

Brake Cylinder Hone 2-Stone Hone Fits Cylinders 11/16 to 2 1/2 (17.4 - 63.5mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step- and blind-end cylinders. 240 grit stones are...

Brake Cylinder Hone Range 13/16” to 2-3/4” Diameter. Flexible drive shaft 5010

Brake Cylinder Hone Repalcement Stones Set of 3 replacement stones for ATD-5010. Will also fit most other makes of hones. 5011

Brake Cylinder Hone Replacement Stone set 240 grit square end replacement stones for Lisle 10000 Brake Cylinder Hone. 3 Stones only 10050

Brake Drum Dolly Removes, installs, and transports truck brake drums without physically having to lift them.. Works on all 15 and 16-1/2 drums found on most class 7 and 8 tractor and trailer brake systems.. 6 height adjustment aids installation....

Brake Fluid Tester Brake Fluid Tester for DOT 4. Determines quality of brake fluid. Measures moisture form 0%-4%. LED lights to show moisture percentage. Automatically shuts off after 12 seconds. 1.5V AAA battery included 4598-DOT4

Brake Fluid Tester Quickly and easily gauge the moisture in all types of brake fluid (DOT 3, DOT 4, DOT 5.1). Easy-to-read LED moisture gauge. Measurements can be displayed to the customer to warrant the needed service. Two-button use: one is the power...

Brake Fluid Tester DOT 3 Determines quality of brake fluid. Measures moisture form 0%-4%. LED lights to show moisture percentage. Automotically shuts off after 12 seconds. 1.5V AAA battery included. Dimensions: 10in x 4in x 0.5in. Product weight: 1 lb...