CV

3 Pc. Spring-Band Clamp Locking Tool Set Low-profile metal clips keep the spring-band clamp held in the open position. Free up hands and pliers for the next spring-band clamp. Three sizes: o 3.81mm (...

Axle Popper Half Shafts are sometimes difficult to break loose with a pry bar. Saves time as the Axle Popper Kit is quick and sure every time. Safer than using a pry bar as the Axle Popper’s wedge...

Axle Popper II The Axle Popper II, the air tool version of our popular Axle Popper, breaks loose half shafts from transaxle on front wheel drive vehicles.. The Axle Popper II is the air tool version...

CV Boot Clamp Pliers For Earless-Type Clamps. A sturdy, low-cost tool. Works on earless-type clamps including those found on GM inboard CV joints. 30500

CV Boot Clamp Pliers Special tips work on the ear-less type CV boot clamps. . Grips clamp in many positions to tighten clamp around boot. 4724

CV Boot Clamp Tool Allows for proper installation of CV boot. Crimps joints while with center pushing feature. Works with hand, 1/2 drive ratchets, or torque wrench. High leverage design 3955

CV Joint Banding Tool and Cutter Use to install and tighten the “band-it” or strap style clamps on CV joint boots, or on power steering rack and pinion steering gear boots.. Once installed into the...

Escort/Lynx Half-Shift Remover/Differential Rotator Essential tool for removing the left-hand half shaft from Escort/Lynx transaxles. . It ensures correct removal and allows the technician to turn...

Heavy Duty Ratcheting Seal Clamp Pliers Ratcheting action provides maximum leverage for making secure high-pressure connections. Numerous applications including fuel lines, A/C lines, transmission...

Inner CV Joint Slide Hammer Puller OTC inner CV joint slide hammer puller pulls CV joints on 1986-current Taurus/Sable. Will also pull other joints having hidden retaining rings. Pry bars can damage...

Slide Hammer Extension No. 7508 – 17-1/2-long slide hammer extension. 7508

Universal Inner C.V. Joint Puller No. 7507 – CV joint fork only. Use with OTC slide hammer No. 1155, extension No. 7508, or both. 7507