Pullers

Angle Bracket Bolt to surface for a 90-degree straight pull, or use with #4030 3-Way Pull Clamp, #4025 pair of Frame Rack Jaws, or #4010 Frame Rack Unibody Clamp. 4035

Axle and Hub Puller Adapter Converts Cat. Nos. 80000, 81000 & 81100, Sluggers to a slide Hammer Axle & Hub Puller.. Adapter accepts 5/8-18 female threaded pulling attachments.. Threads onto our Slugger shaft or any shaft having a 3/4 NPSM thread to pull...

B Clamp Self-tightening. The bodyman’s right arm. Grabs 2-1/4” of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge and original straight tooth design 0100

Baby Box Clamp Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 1 1/2 high (38 mm), 1 1/4 deep (32 mm). 0670

Basic slide hammer, 1-3/4 lb. Hammer Basic Slide Hammer May be used with an internal pulling attachment or with internal or external-internal threaded adapters. 6501 – Basic slide hammer unit is 17 long with a 1-3/4 lb. hammer and a 1/2-20 threaded end...

Bearing Splitter 1/4" to 15/16" Bearing Splitter Feature “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, puller jaws grip...

Bearing Splitter Bearing Splitter Feature “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, puller jaws grip attachment’s...

Bearing Splitter Bearing Splitter Feature “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, puller jaws grip attachment’s...

Bearing Splitter Combo Pack Contains four bearing splitters, plus a pulley pulling attachment. . OTC-1121 – Bearing splitter: 5/16” max. spread and 1/4” min. spread. OTC-1122 – Bearing splitter: 2” max. spread and 1/8” min. spread. OTC-1123 – Bearing...

Bearing Splitter-Small Designed to remove and pull bearings in tight areas. Capacity 1-1/4 to 2-1/4. Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface. Split and separate bearings...

Benz CDI Engine Common Rail Injector Puller Set Removes stubborn injectors on Benz CDI engines without disassembling the cylinder head. Includes slide hammer, puller jaw & set of threaded adapters, including swivel adapter. Applications include: Mercedes...

Benz Fuel Nozzle Kit Kit includes Benz Injector Remover and Nozzle Installer. T-bar/Slide hammer designed for easier removal of the injector nozzle.. For installing the seals on Mercedes Benz & Infiniti fuel injectors. Constructed of stainless steel...