Yg-1 Tool

Square End Mill, 0.625 in Milling Dia., Carbide, TiN, Non-Coolant Through, Straight, Length of 1.25 in, Overall Length 3 1/2 in, Shank Dia. 5/8 in, Neck Dia. Not Applicable

Point SV170 Hardslick Coated Super Cobalt SV Point, High Speed Steel, PVD, 1, 4 mm, Measurement System Metric, ANSI Code SV170220

Flanged Spade Drill Holder, Min. Drill Dia. 45/64 in, Shank Dia. 1 in, High Speed Steel, ANSI Code P27102, Overall Length 10 3/8 in, Shank Length 2 17/64 in, Cutting Direction Right Hand

Ball End Mill, 1 in Milling Dia., Cobalt, TiCN, Non-Coolant Through

Roughing End Mill, 1 in Milling Dia., Cobalt, TiCN, Weldon Flat, Length of 2 in, Overall Length 4 1/4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Roughing End Mill, 0.5 in Milling Dia., Cobalt, Uncoated, Weldon Flat, Length of 1.25 in, Overall Length 3 1/4 in, Shank Dia. 1/2 in, Neck Dia. Not Applicable

Straight Spade Drill Holder, Min. Drill Dia. 55/64 in, Shank Dia. 1 in, High Speed Steel, ANSI Code P15152, Overall Length 10 7/8 in, Shank Length 3 in, Cutting Direction Right Hand

Straight Spade Drill Holder, Min. Drill Dia. 55/64 in, Shank Dia. 3/4 in, High Speed Steel, ANSI Code P15151, Overall Length 10 7/8 in, Shank Length 3 in, Cutting Direction Right Hand

Morse Taper Spade Drill Holder, Min. Drill Dia. 1 29/32 in, High Speed Steel, ANSI Code P01405, Overall Length 14 5/16 in, Cutting Direction Right Hand

Straight Spade Drill Holder, Min. Drill Dia. 2 1/2 in, Shank Dia. 2 in, High Speed Steel, ANSI Code P16506, Overall Length 24 in, Shank Length 4 in, Cutting Direction Right Hand

Point SV820 Hardslick Coated Carbide SV Point, Carbide, PVD, 3, 6.4 mm, Measurement System Fractional Inch, ANSI Code SV820140

Point SV820 Hardslick Coated Carbide SV Point, Carbide, PVD, 3, 6.4 mm, Measurement System Fractional Inch, ANSI Code SV820130