Widia

Thread Forming Tap, Thread Size #8-32, UNC, Overall Length 2 1/8 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size 3.75 mm, Thread Limit H3,...

Threading Insert, NTP, External, Internal, Cutting Direction Left Hand, UN, Product Family Top Notch, Primary Material Application Cast Iron, Nickel, Stainless Steel, Steel, Titanium Pack of 5

Tap Set, Tap Thread Size 5/16 In.-24, High Speed Steel, Bright (Uncoated), Thread Standard UNF, Thread Length 1 1/8 in, Overall Length 2 23/32 in, Thread Limit H3, Class of Fit Not Applicable, Thread...

Diamond Turning Insert, Chip-Breaker Code UM, Inscribed Circle 1/2 in, TiN, ANSI Code CNMG432UM, Chip-Breaker Style On Two Sides, Clearance Angle 0 Degrees Pack of 10

Square End Mill, 0.375 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of 1 in, Overall Length 2 1/2 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable

Square End Mill, 0.625 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of 0.75 in, Overall Length 3 in, Shank Dia. 5/8 in, Neck Dia. Not Applicable

Diamond Turning Insert, Chip-Breaker Code FP, Inscribed Circle 3/8 in, TiN, ANSI Code CPMT3252FP, Chip-Breaker Style On One Side, Clearance Angle 11 Degrees Pack of 10

Diamond Turning Insert, Chip-Breaker Code MS, Inscribed Circle 1/2 in, ANSI Code CNMG431MS, Chip-Breaker Style On Two Sides, Clearance Angle 0 Degrees Pack of 5

Triangle Turning Insert, Inscribed Circle 3/8 in, TiN Pack of 5

Diamond Turning Insert, Inscribed Circle 3/16 in, TiN, ANSI Code GCHW151505, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees Pack of 5

Spiral Flute Tap, Thread Size 1/8 In.-27, NPT, Overall Length 2 1/8 in, Cobalt, TiN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size Q, Thread Limit Not Applicable, Class of Fit Not...

Square End Mill, 0.125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of 0.5 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in, Neck Dia. Not Applicable