Speedaire

Tie Rod Assy, 5/16 to 18 UNC, Series Not Applicable, Compatible with Grainger Part Number 3CRH8B, Product Type Tie Rod Assembly, Compatible with Manufacturer Part Number SG-0300U, Compatible with...

Stationary Air Compressor, Fuel Type Gasoline, Number of Stages 2, Engine Output Power 9 hp, Engine Brand Mi-T-M, Free Air Flow Rate 18.3 cfm, Free Air Flow Rate @ Maximum Pressure 18.3 cfm, Maximum...

Air , Thumb-Lever, Number of Nozzles Included 1, Nozzle Length 1/2 in, Nozzle Tip Material Brass, Nozzle Angle Straight, Nozzle Features Non-Marring, Nozzle Safety, Air Flow Pattern Focused, Sound...

Oil Plug with O-Ring, Compatible with Grainger Part Number 4ZL58, 4ZL59, 4ZL60, 4ZL61, 4ZL62, 4ZL63, Compatible with Brand Speedaire

Pre-Filter, Filter Type Particulate, Air Inlet Size 1/2 in, Air Inlet Type NPT, Maximum Flow Rate 31 cfm, Maximum Operating Pressure 290 psi, Maximum Operating Temperature 176 Degrees F, Overall...

Diaphragm, Compatible with Grainger Part Number 4ZM12, Compatible with Brand Speedaire

Chisel, Non-Sparking No, Shank Shape Square, Shank Size 0.373 in, Shank Design B1/Cleco, Overall Length 7 in, Material Steel, Point Type Flat Chisel, Chisel Tip Width 1 3/8 in, Chisel Scaler Style...

Air Filter Set, Series Not Applicable, Compatible with Grainger Part Number 11X292, Product Type Air Filter Set, Compatible with Series Not Applicable, Compatible with Brand Speedaire, Package...

Hex Wrench, 6mm, Series Not Applicable, Compatible Grainger Part Number 3AAH9, Product Type Hex Wrench, Compatible with Series Not Applicable, Compatible with Brand Speedaire

Oil and Water Separator, Maximum Air Compressor Horsepower 50 hp, Maximum Flow Rate 0.53 cfm, Condensate Inlet Size 1/4 in, Absorption Module Volume 3 gal, Overall Height 27 in, Overall Width 11 in,...

Barbed Hose Fitting, For Hose I.D. 5/16 in, Rigid, Fitting Shape 90 Degrees Elbow, Fitting Material Brass x Brass, Vacuum Rating Not Rated, No Knurl, Barb Size 5/16 in, Hose Fitting A Gender Male,...

Air Motor, Output Power @ Maximum Speed 4 hp, Maximum Torque 84 in-lb, No Load Speed 3,000 RPM, Maximum Flow Rate 128 cfm, Shaft Diameter 5/8 in, Shaft Length 1 3/8 in, Mount Type Face, Inlet Size...