Plast-O-Matic PS100EPW11-120-60-PV

The PLAST-O-MATIC PS100EPW11-120/60-PV is a normally closed, 2-way solenoid valve designed for pilot-operated control of fluid flow in industrial systems. Constructed with a PVC body and EPDM seals, compatible with listed liquids (acids, caustics, chlorine solutions, solvents, ultrapure fluids) within the specified fluid temperature maximum of 140°F and ambient temperature maximum of 104°F. It operates with a 120VAC, 60 Hz power supply and includes the coil necessary for actuation. The valve supports horizontal or vertical mounting orientations and features coil enclosure: NEMA 4X rated (watertight and dust-tight); insulation Class F. Rated for operation with corrosive and ultrapure liquids within specified limits (fluid max 140°F, ambient max 104°F) and with PVC body and EPDM seals. Key Features: - Valve Type: Inline pilot, diaphragm design - Valve Position: 2-Position - Nominal Pipe Size: 1 in - Orifice Diameter: 1 in - Operating Pressure Differential: 5 psi minimum, 70 psi maximum (water) - Fluid Temperature Maximum: 140°F - Ambient Temperature Maximum: 104°F - Body Material: PVC - Seal Material: EPDM - Electrical Connections: 1/2 in conduit - Wattage: 11 W - Coil Enclosure: NEMA 4X rated (watertight and dust-tight); insulation Class F - Includes Seal and Coil: Yes - Environmental Rating: Indoor, Outdoor - NEMA Enclosure Rating: 4X - Thread Type: NPT (Inlet and Outlet) - Overall Dimensions: Length 4 in, Width 4 in, Height 7-9/32 in - Compliance: CSA certified