Rigid Tie

Use this rigid single-piece connector between intersecting wood members. Ideal for lattice construction, utility furniture, or any other project where a 2x member crosses another. Install with 2-SD8...

Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes...

Wraps around the wood members from 2 directions - eliminating the need for angle bracing. Ideal for rectangular frame construction and wood projects with right angles. Connects (2) 2x members at a 90...

Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes...

Used for intersecting 2x members for home projects and repairs. 2" W x 2" H x 2.375" D. Install with 4-SD8 x 1.25" screws in post and 4-SD8 x 1.25" joist. 20-gauge galvanized steel.

Connects 2 members in a pass-through application. This product is ideal for bracing members in shelving units. Install with 4-SD8 x 1.25" screws in post and 8-SD8 x 1.25" screws in joist. 18-gauge...

Use for strengthening intersecting members as in lattice construction. This product is also good for home repair projects. Connects (2) 2x wood members crossing at a 90 deg. angle. Install with 2-SD8...

An interlock provides alignment control and correct nailing locations. For a rafter-to-face connector, flatten the top flange into the face plane. The RR can be used with rafters sloped up to 30 deg....

Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes...