Asco 8215G020B

The ASCO 8215G020B is a direct-acting, 2-way/2-position solenoid valve designed for air and vacuum service. It is constructed with an aluminum body and features a normally closed valve starting configuration. This solenoid valve includes a coil and sealing components, providing automated control by using an energized coil to open or close the flow path. It supports a nominal pipe size of 1/2 inch with NPTF inlet and outlet connections and operates at 120V AC with a coil power consumption of 10.1 W. The valve has an orifice diameter of 3/4 inch and a flow coefficient (Cv) of 4.4; Maximum fluid temperature: 125°F; Ambient temperature range: 14°F to 140°F. It has an IP65-rated coil enclosure; intended for indoor and outdoor use; hazardous-location suitability not specified. The valve’s response time is 120 milliseconds and it has a maximum operating pressure differential of 50 psi for air, inert gas, and water. Key Features: - Valve Type: High Flow, Direct Acting - Design: 2-Way/2-Position with Normally Closed starting configuration - Body Material: Aluminum - Connections: 1/2 in NPTF inlet and outlet - Electrical: 120V AC, 60 Hz, 10.1 W coil wattage, 18 in wire leads - Orifice Diameter: 3/4 in; Cv (flow coefficient): 4.4 - Temperature Ratings: Fluid max 125°F; ambient 14°F to 140°F - Environmental rating: Indoor and Outdoor use; hazardous-location suitability not specified - Coil Enclosure: Watertight without junction box; Insulation Class F - Maximum Operating Pressure Differential: 50 psi for air/inert gas and water - Includes coil and seals - Response Time: 120 msec - Media Compatibility: Air, Vacuum, Fuel Oil, Gas - IP Rating: IP65 - Physical Dimensions: Length 5 in; Width 5-3/8 in; Height 6-27/32 in - Certifications: CSA, FM, UL