Plast-O-Matic EASYMT4V12W24-120-60-PV

The PLAST-O-MATIC EASYMT4V12W24-120/60-PV is a 2-way, 2-position solenoid valve intended for inline installation with a normally closed, direct acting operation. It features a spring return actuator and is constructed with a PVC body and seals. Chemical compatibility is determined by the PVC body and seals; refer to the material compatibility chart for acids, caustics, chlorine solutions, solvents, and ultrapure fluids. It supports a maximum flow rate of 3.4 gallons per minute with a coefficient of volume (Cv) of 1.2 and an orifice diameter of 3/8 inch. The valve can be mounted horizontally or vertically in varied installation setups. Key Features: - Valve Design: 2-Way/2-Position with Normally Closed starting configuration - Body Material: PVC with seal material - Flow Rate: Maximum 3.4 gallons per minute, Cv of 1.2 - Operating Temperature: Fluid up to 140°F, ambient up to 122°F - Electrical: 120 VAC, 60 Hz coil included with 24 W power consumption and Class H insulation - Connections: 1/2 inch NPT inlet and outlet - Construction: Spring return actuator, direct acting operation type - Enclosure: NEMA 4, IP65 rated; rated for indoor and outdoor installation - Dimensions: 6-17/32 in height, 3-5/16 in length, 1-1/2 in width