Asco 8262H002

The ASCO 8262H002 is a direct-acting, normally closed solenoid valve designed to control the passage of liquids and gases through an automated electromagnetic actuation. Constructed with a brass body, media compatibility is defined in the product specifications; refer to the datasheet for the list of supported media. Ambient temperature range: -13°F to 131°F. Fluid temperature rating: up to 180°F. Its 2-way/2-position valve body with a 1/8-inch orifice and nominal pipe size accommodates flow control with a flow coefficient (Cv) of 0.35. This valve can be mounted either horizontally or vertically and includes an coil and sealing components for installation. Key Features: - Valve Design: 2-Way/2-Position, Normally Closed starting configuration - Operation Type: Direct Acting - Body Material: Brass - Nominal Pipe Size: 1/8 in with NPTF inlet and outlet connections - Orifice Diameter: 1/8 in - Flow Coefficient (Cv): 0.35 - Operating Pressure Differential: Maximum 185 psi for air/inert gas and water, 120 psi for light oil; minimum 0 psi across air/inert gas, light oil, and water - Electrical: 240V AC, 10.6 W coil wattage, 60 Hz frequency, with 1/2 in conduit and 18 in leads electrical connections - Coil Insulation Class: H; Coil Enclosure: Without Junction Box, Watertight - Environmental Ratings: Corrosive, Hazardous, Indoor, Outdoor; NEMA Enclosure Ratings: 1, 2, 3, 3S, 4, 4X; IP Rating: 66 - Includes Coil and Seal (NBR) - Dimensions: Overall Length 1-3/16 in; Overall Width 1-11/16 in; Overall Height 2-27/32 in - Response Time: 1 sec