Asco 8210G015

The ASCO 8210G015 is a 2-way, 2-position pilot-operated solenoid valve with a normally closed starting configuration designed to control the flow of air, inert gas, and water. It features a brass body and includes both the coil and sealing components required for installation. The valve is rated for a nominal pipe size of 1/2 inch with NPT thread type connections (inlet and outlet NPTF). It is rated to operate within an ambient temperature range of 14 to 140°F and is rated for fluid temperatures up to 150°F. The valve supports a maximum operating differential pressure of 40 psi for air/inert gas and 125 psi for water, with minimum differentials of 5 psi for each media. Key Features: - Valve Design: 2-Way/2-Position, Normally Closed - Operation Type: Pilot Operated - Body Material: Brass - Nominal Pipe Size: 1/2 in with NPT thread type - Orifice Diameter: 7/16 in - Media Compatibility: Air, Inert Gas, Water - Includes Coil: Yes; Includes Seal: Yes - Electrical: 24V DC, 11.6 W wattage, 1/2 in Conduit Hub connection - Coil Enclosure: Without Junction Box, Watertight - Environmental Rating: Indoor, Outdoor; IP Rating: 66 - Mounting Orientation: Vertical - Response Time: 1 second - Dimensions: Overall Height 3-3/8 in, Length 3-1/4 in, Width 2-5/16 in - Valve Starting Configuration: Normally Closed - Seal Material: NBR - Maximum Ambient Temperature: 140°F; Minimum Ambient Temperature: 14°F - Maximum Fluid Temperature: 150°F - Maximum Operating Pressure Differential: 40 psi (Air/Inert Gas), 125 psi (Water) - Minimum Operating Pressure Differential: 5 psi (Air/Inert Gas, Water) - Standards: UL Listed