Plumbing

45 Degrees Street Elbow, Malleable Iron, Class Class 150, For Pipe Schedule 40, 1 1/4 in, Female, NPT, 1 1/4 in, Male, NPT, 300 psi @ 150 Degrees F Maximum Operating Pressure

Street Tee, Malleable Iron, Galvanized, Class Class 150, For Pipe Schedule 40, 1 in, Female, NPT, 1 in, Male, NPT, 1 in, Female, NPT, 300 psi @ 150 Degrees F Maximum Operating Pressure

Protection Shield, Finish Pre-Galvanized, For Insulation Outside Diameter 4 in, Insulation Thickness Range 1/2 in to 1 1/2 in, Material Steel, Maximum Operating Temperature 150 Degrees F, Minimum Operating Temperature -32 Degrees F, Mount Type Clevis...

Split-Ring Hanger, Cushioned No, For Pipe Size 1 in, For Threaded Rod Size 3/8 in, Hanger Material Malleable Iron, Hanger Material Finish Zinc-Plated, Load Capacity 180 lb, Overall Height 2.25 in

Manual Three-Way Ball Valve, Body Material Bronze, Valve Construction Two-Piece, Average Surface Roughness (Ra) Not Applicable, Flow Pattern L Flow, 3-A Standard Compliance Not Rated, Ball Port Style Standard Port, Nominal Valve Size 1 1/4 in, Inlet...

Dual Check Valve, Size 3/4 In., Body Material Bronze, Max. Temp. 180 Degrees F, Width 4 1/2 in, Length 4 1/2 in, Standards ASSE 1003, IAPMO/ANSI/CAN Z1117, NSF/ANSI/CAN 372, NSF/ANSI/CAN 61, Compliance ASSE 1024 CSA B64.6

Air Gap Drain Kit, For Use With 4A RPZ 1/2 in to 1 in, Size 1/2 in, 3/4 in, 1 in, Connection Type NPT, Material of Construction ABS Plastic, Temp. Range 33 Degrees to 180 Degrees F, Standards ARRA

Double Check Valve Assembly, Series Apollo 4ALF-100, Size 3/4 In., Connection FNPT, Body Material Lead Free Bronze, Temp. Range 33 Degrees to 180 Degrees F, Max. Temp. 180 Degrees F, Max. Pressure 175 psi, Width 3 In., Length 12-3/4 In., Height 3-1/2 In...

Reduced Pressure Principle ValveSize 1 In., Connection NPT, Material of Construction Lead-Free Bronze, Temp. Range (F) 33 To 180, Max. Temp. (F) 180, Max. Pressure (PSI) 175, Width (In.) 3-1/4, Length (In.) 14-5/8, For Use With Mfr. No. 4ALF205T2F,...

Safety Relief Valve, Body Material Bronze, Inlet Type FNPT, Outlet Type FNPT, Inlet Size 1 in, Outlet Size 1 in, Factory Set Pressure 30 psig, Pressure Range 15 to 160 psi, 1,339,000 BtuH BtuH, Disc Material Brass, Overall Height 5 5/8 in, Application...

Valve, Pressure Reducing, Material of Construction Lead Free Bronze, Inlet/Outlet 1 In., Double Union Solder Connection, Max. Working Pressure (PSI) 400, Adjustable Range 15-75 psi, Pressure Setting 50 psi, Max. Temp. (F) 180, Height (In.) 6, Length (In...

Wall Hydrant, Inlet Size 1/2 in FNPT, Wall Thickness 4 in, Recommended Wall Opening 1-1/2 in dia, Length 5 1/2 in, Handle Type Key, Casing Material Stainless Steel, Outlet Size 3/4 in, Max. Pressure 125 psi, Max. Temp. 140 Degrees F