IEC Magnetic Contactor, 1NC-1NO, 208V AC, 3 P, Non-Reversing, Screw Clamp LC1D80L6

The IEC Magnetic Contactor (TeSys Deca) is a three‑pole, non‑reversing, electrically operated switch rated for operation within specified electrical parameters. It has 1 normally open and 1 normally closed auxiliary contact (2 total) and is designed for use with coils rated at 208 V AC. Classified as an IEC contactor, it is suitable for controlling motors and resistive loads within specified ratings and is compatible with standard control panel configurations as per manufacturer specifications. Key features: - Poles and contacts: 3 main contacts (3 normally open) with 2 auxiliary contacts (1NO/1NC) - Coil voltage: 208 V AC - Reversing: non-reversing configuration (if applicable) - Series/format: IEC Contactor, TeSys Deca - Electrical characteristics: 60 Hz, Three-phase - Enclosure/IP: IP20; No Enclosure - Mechanical/electrical durability: 10 Mcycles mechanical; 1,500,000 cycles (80 A AC-3, <440 V) and 0.8 Mcycles (125 A AC-1, <440 V) - Power and currents: rated horsepower capacities are based on specific voltage conditions; refer to technical specifications for detailed ratings - Rated voltages: rated voltages are within specified operational limits according to manufacturer data - Rated making capacity: maximum switching capacity under specified test conditions; actual performance may vary depending on application conditions - Physical dimensions and weight: Depth 5.12 in; Width 3.35 in; Height 5.00 in; Net weight 1.59 kg - Connection and mounting: Screw Clamp terminals; Mounting on DIN Rail or Plate; Mounts on Plate, Rail - Additional notes: Includes protective cover; Embedded surge suppressor not present; Hold current 22 VA; Inrush 220 VA