Brake Tire and

Separator Tool Separator Tool This handy tool is multipurpose. It will remove camber adjustment sleeves on Ford pickups that have an adjustable camber. It’s also a separating tool for tie rods on medium- and heavy-duty trucks. And it works as a Pitman...

SHEPPARD PITMAN ARM REMOVER Applications: M80, M90, M100, M110, 292, 392, 492 & 592. Used on Chevy/GMC, Freightliner, Kenworth, Mack, Navistar, Paccar, Peterbilt, Volvo, and many others. Fits short sector shaft and long sector shafts with a bolt or nut...

Shock Link and Tie Rod Separator Shock Link and Tie Rod Separator Here’s a tool that will convince even the most stubborn shock links and tie rods to part company. Just insert the tapered wedge between the seized parts, and smack the other end with a...

Spicer Clutch Adjusting Wrench For Spicer-built Heavy-Duty Clutches. This easy-to-use clutch adjusting wrench will solve the difficult, time-consuming job of internal adjustment of Spicer angle-spring and multiple lever clutches found on nearly 50% of...

Step Plate Adapter Set Step Plate Adapter Set Necessary for pulling and installing bearings, gears, or other parts found on hollow shafts or housings. They may be used with Grip-O-Matic pullers and Push-Pullers, as well as shop presses. 8076 Set 8068 – O...

Step Plate Adapter Set for 17.5-Ton Press Step Plate Adapter Set Necessary for pulling and installing bearings, gears, or other parts found on hollow shafts or housings. They may be used with Grip-O-Matic pullers and Push-Pullers, as well as shop presses...

Stepped Pickle Fork Kit Step Design Helps Keep Tool from Bouncing Back When Separating Ball Joints, Steering Dampeners, Tie Rods, Pitman Arms and Other Applications. . Six tools in one. Three forks and two handles. Forks are threaded to interchange with...

Subaru Ball Joint Adapter Set This 3-adapter set is used in conjunction with the 7248 C-frame to remove and install ball joints on select Subaru vehicles. Set contains adapter part numbers 581996, 581995 and 581994 for use on:. 2005-2006 Baja. 2016-2017...

Subaru Ball Joint Puller Removes the front suspension ball joints quickly, safely and efficiently without damage. 19mm (3/4) hexagon drive spindle can be turned with a wrench or impact wrench. 41mm hex on the main socket body is for holding in place...

Super Duty Pitman Arm Puller Works on 2005 and newer Ford F-250 and F-350 four-wheel-drive Super Duty trucks. Allows the Pitman arm to be removed from the steering gear while the steering gear is still in the vehicle. Two clamp bolts lock the jaws on the...

Ten-Way Slide Hammer Puller Set with Plastic Case Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross head, cone, 2-way cross block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, puller...

Texas Twister Air Hammer Pulling Kit Now you can convert your air hammer into a pneumatic slide hammer with the Texas Twister. Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits attached. Reverse the air...