Brake Tire and Suspension

1-1/2" Heavy-Duty Cap Nut Wrench Heavy-duty design will not slip out of position. Wrench rests snugly against the center hole, reducing the possibility of rim damage. Ideal for aluminum wheels 30618

1-1/2" Porkchop Cap Nut Wrench Wrenches hold outer cap nut on dual wheels while the inner nut is turned. Lip fits in hole to secure wrench in place 30609

1/2" Dr, Ratcheting Breaker Bar 18" 1/2 drive ratchet head swivels 180_. Heavy duty chrome vanadium steel construction. Maximum torque: 376 ft/lbs. (52 kg/m). 3-way ratcheting action: right-hand thread, left-hand thread or lock. Chrome plated bar and...

1/2" Dr, Ratcheting Breaker Bar, 24" 1/2 drive ratchet head swivels 180_. Heavy duty chrome vanadium steel construction. Maximum torque: 376 ft/lbs. (52 kg/m). 3-way ratcheting action: right-hand thread, left-hand thread or lock. Chrome plated bar and...

1/2" Dr. Spindle Nut Socket Forged from CR-V alloy steel for maximum strength . Services 1988-95 Isuzu Trooper. Rodeo. Amigo. and pickups; 1985-89 Honda Passport; Jeep J2 pickups with Dana 6 axle. . This socket is not intended for use with an impact tool...

1/2" Drive #10 Nut/Lock Remover Size #10 for use on nut size 3/4/19mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited use...

1/2" Drive #12 Nut/Lock Remover Size #12 for use on nut size 13/16/21mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited use...

1/2" Drive #13 Nut/Lock Remover Size #13 for use on nut size 13/16/21mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited use...

1/2" Drive #8 Nut/Lock Remover Size #8 for use on nut size 5/8/16mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited use. Sold...

1/2" Drive #9 Nut/Lock Remover Size #9 for use on nut size 11/16/17mm & 18mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited...

1/2" Drive 11 Piece Extra-Thin Wall Wheel/Nut Protector Set Grey Pneumatic sockets are designed for professional tool users.. Made of high quality alloy steel.. Engineered specifically for use with impact tools.. Benefits of the GP Impact Socket “High...

1/2" Drive 13/16" x 100 ft. lb. Brown Tork-Socket Always follow manufacturers torque specifications when using this product. Heavy Duty Blister Pack. Weight: 0.91 lbs. 28222