Tools

Ford Timing Tool Kit - 4.6L, 5.4L, 6.8L Kit contains everything required to perform timing service on 4.6L, 5.4L and 6.8L Ford Triton engines. Includes: Crankshaft Positioning Tool, Valve Spring Compressor, & Camshaft Locking Set. Compare to Ford Factory...

Ford Transmission Cooler Line Disconnect Tool snaps around cooler line and, when pushed into the fitting, releases the fitting. The cooler line can then be removed.. 3/8 disconnect is used on 2003–newer Ford Explorers with the 5R55W transmission...

Ford Transmission Cooler Line Disconnect Set Ford Transmission Cooler Line Disconnect Set. Snap around cooler line, push into the fitting, fitting releases. The cooler line can then be removed.. 3/8 disconnect is used on 2003–newer Ford Explorers with...

Ford Triton Spark Plug Extractor Works to extract frozen & broken-off spark plug sleeves in '04 to present Ford Triton Engines. Specially machined guide works with extra long tap & extractor to make sure the job is done right. Patent Pending 5402

Ford Triton Spark Plug Porcelain Extractor Used to extract porcelain from broken spark plugs in 2003 to current Ford Triton Engines .Tool adheres to the broken porcelain using a special Loctite™ and allows the user to extract the porcelain from the...

Ford Triton Spark Plug Thread Repair Kit For use on three valve 5.4 L and 6.8 L engines built before 10/9/07 and 3-valve 4.6 L engines built before 11/30/07 found in many 2004–2008 Ford, Lincoln and Mercury . The spark plug tends to break off in the...

Ford Turbo Vane Actuator Installer This tool has been designed to install the actuator link rod on the arm of the turbo on the 2008 to 2010 6.4L Ford Power Stroke Diesel engine. When servicing either the turbo or actuator they must be separated. This...

Ford Valve Spring Compressor - 4.0L Primarily services Ford 4.0L SOHC V6's. And some late model 4.6L V8's. 3 pieces with detachable end to enable access in tight areas. Compare to Ford Factory Tool #T95T-6565-A 2823

Ford Water Pump Pulley Tool Removes and installs water pump pulley on 3.0L DOHC engine. 2 Hex head cap screws with washers and a forcing screw equipped with a special nut for installing . Compare to Ford factory tool #'s 303-S455, 303-009, 303-457...

Ford Wheel Bearing Puller (Explr,Taur, Flex: 2011- Current) Plus Excels at effortlessly extracting the most obstinate wheel bearing hubs. Eliminates the need for tedious control arm removal or hammering. Ensures seamless removal. Preserves both time and...

Ford/Subaru Wheel Bearing Puller Plus w Rail Excels at effortlessly extracting the most obstinate wheel bearing hubs. Eliminates the need for tedious control arm removal or hammering. Ensures seamless removal. Preserves both time and precision TOM450PROP

Ford/Volvo Wheel Bearing Kit For removal and installation of wheel hubs and bearings on Ford, Land Rover and Volvo models..Services up to 82mm diameter wheel bearings on newer Gen 2 type wheel bearings. .The clamshells and force plates/pins, ensure the...