Pullers

HD Harmonic Crank Pulley Puller For use crank pulley dampeners without female threaded holes such as GM LS engines, Ford Coyote and more. Heavy duty grade 9 drive bolt (class 12.9) 78450

Head assembly only for 1173 Slide Hammer Head assembly only for 1173 Slide Hammer Jaw spread of 1/2 to 1-3/8, adjusted by turning the slide hammer handle. Fits handle end with a 1/2–20 thread. No. 1174 – Head assembly only. 1174

Heavy Duty Brake Drum and Rotor Puller Designed for medium and heavy duty brake applications. Two 3/4 x 14 UNF Forcing Screws (6.2 and 13.3 threaded length) with 1 diameter hex and striking cap. One 1/2 x 2-1/4 x 19-3/4 Cross Bar - tapped 3/4 x 14 UNF...

Heavy Duty Claw Use the DF-512 for heavier wiggle wire pulls, power post pulls and pull wider areas. DF-512

Heavy Duty Flange-Type Puller Pulls harmonic balancers, timing gears and parts having two or three tapped holes.. Slotted holes in puller body permit cap screws to be positioned to handle bolt circle diameter from 1/2 to 4-1/4. Reach of puller is 4-1/4....

Heavy Duty Hub Drum & Rotor Puller Kit Use with impact wrench to remove hubs, drums and brake rotors. Use with 1-1/4” or 32mm socket and wrench 78830

Heavy-Duty Bearing Cup Installer - Fits Spicer SPL 140, 170, and 250 Series Quickly and easily installs bearing cups on Dana/Spicer SPL “Life Series” quick-disconnect universal joints.. Three individual adapters press bearings to the manufacturer’s...

Heavy-Duty Bearing Cup Installer Fits Series 1610 to 1880 Quickly and easily installs bearing cups on boltretained universal joints. Fits series 1610 to 1880 and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups....

Heavy-Duty Gear Puller The OTC 6614 Heavy Duty Gear Puller will remove gears up to 7-1/4 in diameter, including most cam gears. Rated at 8 tons, this puller is stout enough for almost any heavy-duty application and includes a pair of metric bolts for...

Heavy-Duty Wiper Arm Puller Designed to remove aluminum arm from steel stud, which often galvanizes and locks arm and stud together.. Investment cast design is strong, easier to use—saves time. Live center end allows for more precise alignment—saves...

Hinge Plate Use in existing holes in frame structures or body panels. Comes with 3/8 Shackle (#5626) for angle pulls. 5623

Honda and Acura Long 4" Offset Damper Pulley Holding Tool This unique tool has been developed to aid in the removal and installation of the crank bolt on most Honda and Acura engines. It has been re-engineered to work on 2004 and later new style SUV’s...