Greenlee

Knock Out Draw Stud, Size 7/16 in, Material Steel, For Use With Dies, Manual Tool, Punches, Includes Draw Stud

Knock Out Die, Knockout Die, Hole Size Nominal 1 in, Hole Size (In.) 1 9/25 in, Conduit and Pipe Size (In.) 1 in, Max. Capacity Mild Steel (Ga.) 10 ga, Alignment Markings, Marking, Optimized for...

Upper and Lower Crimping Die Set, Compatible Connector Type Aluminum, Compatible Cable Type Aluminum, Number of Crimping Sizes 16, Connector Color Code Black, Blue, Brown, Gold, Gray, Green, Olive,...

Knock Out Die, Knockout Die, Hole Size Nominal 2.5 in, Hole Size (In.) 2 91/100 in, Conduit and Pipe Size (In.) 2 1/2 in, Max. Capacity Mild Steel (Ga.) 10 ga, Alignment Markings, Marking, Optimized...

Screwdriver, Tip Size 1/4 in, Cabinet Tip, Overall Length 8 5/16 in, ESD Safe No, Insulated No

Rigid, Swivel, Plate Caster, Load Rating 3600 lb, Swivel Lock Type Total Lock, Wheel Dia. 8 in, Wheel Width 2 in, Wheel/Tread Material Polyurethane, Wheel Core Material Nylon, Non-Marking Yes, Number...

Hydraulic Hose Assembly, Hose Inside Dia. 3/8 in, Hose Length 10 ft, Hose Tube Material Rubber, Hose Cover Material Rubber, Hose Reinforcement Type Braid, Hose Reinforcement Material Fiber, Hose...

Knock Out Draw Stud, Size 3/4 in, Material Steel, For Use With Dies, Manual Tool, Punches, Includes Draw Stud

Mechanical Conduit Bender, EMT Conduit Size - Aluminum and Galvanized Steel Not Applicable, EMT Conduit Size - Stainless Steel Not Applicable, IMC/RMC Conduit Size 1/2 in, 3/4 in, 1 in, Centerline...

If you need to pull cable, the Greenlee 35284 Cable Pulling Rope is an excellent choice. This rope has been designed for indoor and outdoor use. The rope is rot and , which means it will not corrode...

Hole Saw, Primary Material Application Steel, Materials Steel, Arbor Design Arbor Not Included, Tooth Material Bi-Metal, Saw Dia. 3 3/4 in, Teeth per Inch 4/6, Max. Cutting Depth 1 5/8 in, Impact...

Greenlee's 7235BB 10 Piece Manual Punch Driver Set is the ideal tool for punching through thick metal. It comes with 10 pieces that are designed to work on 10 ga. mild steel. The punch driver set can...