Dayton

The DAYTON - 3GWX9 is a Cogged, Classical V-Belt designed for general industrial applications. This product falls under the Power King Cog series and is made from gum rubber with a fabric cover,...

The DAYTON - 2MEV1 is a Capacitor Mounting Kit. This kit serves as an essential tool for industry professionals who need to install capacitors in power transmission and pneumatic systems. The...

Wedge V-Belt, Belt Material Rubber Compound, Edge Construction Wrapped, Industry Number B225, Number of Bands 1, Outside Length 228 in, Reinforcing Cord Material Polyester, Thickness 13/32 in, Top...

General Purpose Motor, Single Phase, Motor Design Split-Phase, 1/3 hp, 1/9 hp HP, Nameplate RPM 1,725/1,140 RPM, No. of Speeds 2, Voltage 115V AC, Full Load Amps 6.1/3.5 A, 56 Frame, Hz 60 Hz, Motor...

Motor Run Capacitor, Motor Run Capacitor, Oval, 440V AC, Microfarad Rating 17.5 MFD, Overall Height 3 1/2 in, Case Material Aluminum

Motor Start Capacitor, Motor Start Capacitor, 220-250V AC, Microfarad Rating 105-126 MFD, Round, Case Height 3 3/8 in, Diameter 2 1/16 in

OEM Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Not Applicable, Assembly Assembled, Wheel Diameter 7 in, Airflow @ 0.000 in SP 229 cfm, Airflow @ 0.100 in SP...

General Purpose Motor, Single Phase, Motor Design Capacitor-Start, 1/2 hp HP, Nameplate RPM 1,725 RPM, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 7.7/3.9-3.9 A, 56C Frame, Usable @ 208V...

Wire Rope Sling, Sling Material Steel, Rope Diameter 1/4 in, Rope Core Type IWRC, Rope Coating Type Uncoated, Rope Strand Classification 6 x 19, Sling Length 4 ft, Sling Leg Length Not Applicable,...

The DAYTON - 3L430 is a Fractional Horsepower (FHP) V-Belt, a type of power transmission belt commonly used in industrial applications. This V-belt is intended for use as a medium of power...

Industrial Timing Belt, Belt Material Neoprene, Belt Series XL, Industry Number 80XL037, Number of Teeth 40, Pitch 0.2 in, Pitch Length 8 in, Tooth Location One Side, Top Width 3/8 in, Application...

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/8 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 7/8 in, Inside Height to Flat Not Applicable, Clearance...