Dayton

Roller Chain, Chain Construction Riveted Pin, Overall Length 100 ft, Material Steel, Chain Number 50, Chain Overall Width 0.86 in, Roller Diameter 13/32 in, Tensile Strength 4,880 lbf, Pitch 5/8 in,...

General Purpose Motor, Three-Phase, Open Drip Proof Motor Enclosure Design, 2 HP, Nameplate RPM 1745, Frame 143/5TC, Voltage 230/460V AC, 60 Hz Hz, Three Phase, Full Load Amps 5.8/2.9 A, C-Face Motor...

General Purpose Motor, Three-Phase, Totally Enclosed Fan Cooled Motor Enclosure Design, 20 HP, Nameplate RPM 1,770, Frame 256T, Voltage 230/460V AC, 60 Hz Hz, Three Phase, Full Load Amps 48.5/24.3 A,...

Condenser Fan Motor, Three Phase, Motor Design Three-Phase, 1 hp HP, Nameplate RPM 850 RPM, No. of Speeds 1, Voltage 208-230/460V AC, 5.0-5.0/2.5 A Full Load Amps, 56YZ Frame, 60 Hz Hz, Motor Service...

Jet Pump Motor, Body Dia. 5.9 in, CC Number CC030A, Conduit Box Location Exterior, Conduit Box Position Not Applicable, Diaphragm Type Not Applicable, Duty Cycle Continuous, Finish Gray, Frame 56C,...

Axial Fan, Fan Shape Square, Mounting Eye O.C. 4 1/8 in, Height 4 11/16 in, Diameter Not Applicable, Depth 1 1/2 in, Width 4 11/16 in, CFM @ 0.000-In. SP 62 cfm, 90 cfm, Watts 14/16 W, Voltage 115V...

Centrifugal Pump, Phase Single, Pump Housing Material Cast Iron, Horsepower 3/4 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 40 ft of Head (Maximum) 41 gpm, Maximum Feet of Head 50 ft, Compatible...

The DAYTON IEC Magnetic Contactor is an electrically operated switching device rated for operation within the specified IEC standards. It is a 3-pole, non-reversing unit with a 120 V AC coil and two...

General Purpose Motor, Single Phase, Motor Design Capacitor-Start, 2 hp HP, Nameplate RPM 1,730 RPM, No. of Speeds 1, Voltage 115/230V AC, Full Load Amps 23.2/11.6 A, 182T Frame, Hz 60 Hz, Motor...

Shaft Coupler Body, Coupling Size L110, Outside Diameter 3 21/64 in, Coupling Overall Length 4 15/64 in, System of Measurement Inch, Hub Material Sintered Iron, Maximum Speed 5,000 RPM, Horsepower @...

Centrifugal Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 1 1/2 hp, Nameplate Voltage 230/460V AC, Flow Rate @ 40 ft of Head (Maximum) 48 gpm, Maximum Feet of Head 50 ft, Compatible...

Standard Square Axial Fan, Fan Shape Square, Mounting Eye O.C. 4 1/8 in, Height 4 11/16 in, Depth 1 1/2 in, Width 4 11/16 in, CFM @ 0.000-In. SP 99/87 cfm, Watts 21/22 W, Voltage 230V AC, 60/50 Hz...