Dayton

The DAYTON - 36VF90 is a General Purpose Motor, classified under the category of 3-Phase AC Motors. This motor is widely used in industrial and commercial settings for power transmission and...

Handle Grip, Product Type Handle Grip, Compatible with Manufacturer Part Number VN1500, VN1715, VN2015, VN20DS

AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 60 RPM, Maximum Torque 59 in-lb, Overhung Load Capacity 150 lb, Rotation CW, Output...

Suction Strainer, Perforation Shape and Location Side Round, Material Steel

Bung Adapter, Adapter Material Polypropylene, For Container Size 55 gal, For Container Type Drum, Bung Connection Dia. 2 in, Adapter Connection Type BSP, Max. Operating Temp. 120 Degrees F, Wetted...

Pump Casing, Compatible with Brand Dayton, Compatible with Grainger Part Number 2YEV4, 2YEV5, 2YEV6, 2YEV7, 2YEV8, 2YEV9, 2YEX1, 2YEX2, 2YEX3, 2YEX4, 2YEX5, Compatible with Pump Type Centrifugal...

General Purpose Motor, Three-Phase, Open Drip Proof Motor Enclosure Design, 1 1/2 HP, Nameplate RPM 1760, Frame 56C, Voltage 230/460V AC, 60 Hz Hz, Three Phase, Full Load Amps 4.3/2.1 A, C-Face Motor...

Banded V-Belt, Belt Material Rubber Compound, Edge Construction Wrapped, Industry Number B180, Number of Bands 4, Outside Length 183 in, Reinforcing Cord Material Polyester, Thickness 1/2 in, Top...

General Purpose Motor, Three-Phase, Totally Enclosed Fan Cooled Motor Enclosure Design, 3 HP, Nameplate RPM 3480, Frame 143/5TC, Voltage 230/460V AC, 60 Hz Hz, Three Phase, Full Load Amps 7.1/3.5 A,...

Fan Blade, Propeller Dia. (In.) 18 in, CFM @ 0.000-In. SP 2,950 cfm, CFM @ 0.300-In. SP 1,834 cfm, Min. HP 1/4 hp, Max. RPM 1,140 RPM, Pitch (Deg.) 33 Degrees , CCW Rotation, Number of Blades 4,...

AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 30 RPM, Maximum Torque 113 in-lb, Overhung Load Capacity 150 lb, Rotation CW, Output...

Timing Belt, Belt Material Neoprene, Belt Series Synchro-Link(R), Industry Number 1280-8M-30, Number of Teeth 160, Pitch 8 mm, Pitch Length 1,280 mm, Tooth Location One Side, Top Width 30 mm,...