Dayton

Cogged V-Belt, Belt Material Gum Rubber, Edge Construction Raw Edge, Industry Number CX115, Number of Bands 1, Outside Length 119 in, Reinforcing Cord Material Polyester, Thickness 0.531 in, Top...

Winch Cable, Cord Diameter 1/8 in, Cord Length 100 ft, Color Silver, Maximum Load Capacity 400 lb, Cord Type Cable, Cord Material Galvanized Steel, Number of Strands 7 x 19, For Use With Winches,...

V-Belt, Belt Material Gum Rubber, Edge Construction Wrapped, Industry Number C130, Number of Bands 1, Outside Length 134 in, Reinforcing Cord Material Polyester, Thickness 0.531 in, Top Width 7/8 in,...

Mounted Fan, Blade Dia. 36 in, Stationary, Non-Oscillating, 1 Speeds, Voltage 115/230V AC, 1 Phase, CFM High 12,627, CFM Low 12,627, Motor HP 1/2 hp, Motor RPM 825, Operating Amps 5.2/2.6, Fan...

Solenoid Valve Body, Valve Ways 2-Way, Valve Positions 2-Position, Valve Starting Configuration Normally Closed, Body Material Brass, Nominal Pipe Size 1/4 in, Orifice Diameter 1/8 in, Coefficient of...

Tubeaxial Fan Blade, Blade Dia. 18 in, Number of Blades 6, Hub Bore 7/8 in, For Use With Fan No. 4C661

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1/4 in, Bore Thread Size Not Applicable, Collar Outside Diameter 11/16 in, Inside Height to Flat Not Applicable, Clearance...

Wire Rope U-Bolt Clip and Thimble Kit, Compatible Rope Diameter 1/2 in, Rope Turnback Length 11 1/2 in, Number of Thimbles Included 1, Total Number of Fittings Included 3, Number of Clips Included 2,...

Door Louver, Material Steel, Finish Gray Primer, Louver Opening Height 20 1/2 in, Louver Opening Width 20 1/2 in, Rough Opening Height 20 1/2 in, Outside Height 22 1/8 in, Outside Width 22 1/4 in,...

Bearing, Cord Length Not Applicable, Length 40 mm, Material Not Applicable, For Use With Bearing

Solenoid Valve Body, Valve Ways 2-Way, Valve Positions 2-Position, Valve Starting Configuration Normally Closed, Body Material Brass, Nominal Pipe Size 3/4 in, Orifice Diameter 3/4 in, Coefficient of...

Flange Mount Bearing, Back Side to Center Width 0.748 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 7/16 in, Bore Type Cylindrical, Center Height 2 5/16...