Dayton

Banded V-Belt, Belt Material Rubber Compound, Edge Construction Wrapped, Industry Number B96, Number of Bands 3, Outside Length 99.8 in, Reinforcing Cord Material Polyester, Thickness 1/2 in, Top...

Compatible with Product Type Standard Unit Heaters, Compatible Grainger Part Number 2RYV3, Compatible Mfr. Model Number 2RYV3, Includes Gas Valve Spring, Labels of Conversion, LP Orifice Drill Size...

Selector Switch, 30 mm, 3 Position, Momentary/Maintained/Momentary Action, 1NO/1NC Contact Form, Type of Operator Lever, Color Black, No Key Key Removal, Operator Head Material Plastic, Basic...

AC Gearmotor, Number of Output Shafts 1, Motor Type 3-Phase, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 279 RPM, Maximum Torque 69 in-lb, Overhung Load Capacity 325 lb, Rotation...

Propeller, Propeller Dia. (In.) 12 in, Bore Dia. (In.) 5/16 in, Bore Dia. (mm) 7.93 mm, Pitch 24 Degrees , Rotation CW, Hub Location Intake, Number of Blades 3, HP 1/30 hp, RPM 1,664 RPM, Drive Type...

The DAYTON - 5X480 is a Classical V-Belt, an essential component in power transmission applications. This mechanical device is intended for use in transferring power between rotating shafts, often...

Grille, For Use With Grainger Item Number 5AE75Fits Brand Dayton

Caster Kit, Load Capacity Not Applicable, Axle-Mounted Wheel Dia. Not Applicable, Axle-Mounted Wheel Type Not Applicable, Caster Wheel Dia. Not Applicable, Caster Mounting Type Not Applicable, Caster...

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 3/16 in, Bore Thread Size Not Applicable, Collar Outside Diameter 5/8 in, Inside Height to Flat Not Applicable, Clearance...

Standard-Duty Industrial Fan, Blade Dia. 30 in, Mobile, Non-Oscillating, 2 Speeds, Voltage 120V AC, 1 Phase, CFM High 6900, CFM Low 4700, Air Velocity @ 20 Ft. 340/260 fpm, Motor HP 1/3 hp, Motor RPM...

General Purpose Motor, Single Phase, Motor Design Split-Phase, 1/6 hp HP, Nameplate RPM 850 RPM, No. of Speeds 1, Voltage 115V AC, Full Load Amps 7.0 A, 56 Frame, Hz 60 Hz, Motor Service Factor 1.35,...

Optional Floor Stand, Anvil Dia. Work Area (In.) 22 1/4 in, Height (In.) 35 13/16 in, Width (In.) 11 4/5 in, Depth (In.) 22 1/4 in, Base Size (In.) 11 13/16 x 22 1/4 in, Features handle all of the...