Dayton

Jet Pump Motor, Body Dia. 6.6 in, Duty Cycle Continuous, Frame 56J, Hz 60/50, Full Load Amps 5.4-4.9/2.4, HP 2, Includes Shaft Slinger, Ins. Class F, Max. Ambient Temp. 50 Degrees C, Motor...

Solenoid Valve Body, Valve Ways 2-Way, Valve Positions 2-Position, Valve Starting Configuration Normally Closed, Body Material Brass, Nominal Pipe Size 1/8 in, Orifice Diameter 1/16 in, Coefficient...

Wood Dust Collector, Mounting Type Stationary, Dust Collector Type Cyclone, Filter Type Bag, Nameplate Voltage 230/460V AC, Air Flow - Maximum 2,600 cfm, Main Inlet Diameter 8 in, Number of Adaptor...

Utility Pump, Housing Material Brass, Horsepower - Maximum 1/3 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 10 ft of Head - Maximum 9.6 gpm, Viscosity - Maximum 5,000 SUS, Feet of Head - Maximum 50...

Gasket, Compatible with Pump Type Straight Centrifugal, Compatible with Brand Dayton, Compatible with Grainger Part Number 12N806, 4YY38A, Compatible with Manufacturer Model Number 12N806, 4YY38A,...

Scissor Lift Table, Platform Length 56 in, Platform Width 32 in, Maximum Load Capacity 5,000 lb, Minimum Lifting Height 10 in, Maximum Lifting Height 48 in, Up Speed Time 27 sec, Power Source...

DC Speed Control, DC Speed Control SCR, NEMA 4X, Lower Voltage Motor Output Power 1/50 to 1/8 hp, AC Input Voltage 120/240V AC, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Reversible,...

Straight Chain, Chain Type Coil Chain, Material Carbon Steel, Lifting Capability Not for Lifting, Working Load Limit 670 lb, Trade Size 4/0, Link Inside Length 1 3/8 in, Link Type Straight, Link...

General Purpose Motor, Single Phase, Motor Design Split-Phase, 1/2 hp HP, Nameplate RPM 1,140 RPM, No. of Speeds 1, Voltage 115V AC, Full Load Amps 8.7 A, 56 Frame, Hz 60 Hz, Motor Service Factor 1,...

Festoon Intermediate Trolley, Compatible Track Type C-Track, Compatible I-Beam Size Not Applicable, Compatible Cable Type Round, Minimum Compatible Flat Cable Height Not Applicable, Maximum...

Inlet Hose, Product Type Inlet Hose, Compatible with Grainger Part Number 3AA20, 3AA28, Overall Dia. Not Applicable, Overall Length Not Applicable, Overall Depth Not Applicable, Overall Width Not...

Retaining Angle, Actual Height 5 3/4 in, Actual Width 11 3/4 in, Material Galvanized Steel, Standards UL 555, Fusible Link Temperature Not Applicable, Product Type Damper Retaining Angle, Material...