A46 V-Belt, 48" Outside Length, 1-2" Top Width, 1 Ribs, 5-16" Thick, 3X471

The DAYTON - 3X471 is a Classical V-Belt, an essential tool intended for the transfer of power between rotating shafts. This belt is typically found in industrial machinery or heavy-duty vehicles. Constructed from gum rubber with a fabric cover and polyester cords, this belt is designed for use in applications with high torque levels and within specified temperature ranges. Key Features of the DAYTON - 3X471 Classical V-Belt: Belt Material: The belt is made from gum rubber, a material known for its potential durability and strength. Construction: The wrapped construction is intended to offer some degree of protection against wear and tear. Operating Temperature Range: With a maximum operating temperature of 194 Degrees F and minimum operating temperature of -22 Degrees F, it is rated for operation within specific temperature ranges. Resistance Properties: It has been tested for resistance properties against heat, oil as per standard testing procedures. Its suitability depends on the specific requirements of the industrial environment it will be used in. V-Belt Section: Classified as 'A' section V-belt indicating its specific dimensions and compatibility with certain machinery types. Outside Length & Top Width: With an outside length of 48 inches and top width of half an inch, these measurements should be considered when determining compatibility with various industrial machinery or commercial equipment systems.