IEC Magnetic Contactor, 1NC-1NO, 24V AC, 4 P, Non-Reversing, Screw Clamp LC1DT25B7

The Schneider Electric IEC Magnetic Contactor is a 4-pole, non-reversing device with a 24 V AC coil. It features a 1NC/1NO auxiliary contact configuration (and a total of 4 auxiliary contacts), and uses screw clamp terminals for control and power circuits. Part of the TeSys Deca family, it includes a protective cover and is rated for operation within the specified IEC standards and compatible with standard mounting options. Key features - Coil voltage: 24 V AC - Poles and contacts: 4P; 4 NO main contacts; auxiliary contacts 1NC/1NO (4 total) - Reversing capability: Non-Reversing - Electrical connections: Screw Clamp terminals - Mounting options: DIN Rail; mounting support on Plate and Rail - Protection: includes a protective cover rated for IP20 protection level - Impulse withstand: rated for impulse voltage up to 6 kV according to applicable standards - Insulation voltage: Designed to operate within the specified insulation voltage ratings (600 V power circuit, 690 V signaling circuit) - Rated making capacity: up to 140 A (AC signalling); 250 A (DC signalling); 250 A @ 440 V (power circuit) under normal operating conditions - Major current ratings: suitable for resistive loads up to 200 A and inductive loads up to 25 A at the specified voltages - Coil power characteristics: designed with coil power consumption within these ranges during inrush and hold-in states (Inrush 70 VA; Hold-in 7.5 VA @ 60 Hz / 7 VA @ 50 Hz) - Heat dissipation: 2–3 W - Durability: tested durability specifications based on industry standards but actual lifespan may vary depending on usage conditions - Mechanical shocks/vibration: 10 G (open); 15 G (closed); 4 G (closed); 2 G (open) - Operating speed and timing: 3600 cycles/hr; opening 4–19 ms; closing 12–22 ms - Physical dimensions: Height 85 mm; Width 45 mm; Depth 92 mm - Certifications: UL; CSA; CCC; GL; BV; LROS; GOST; RINA; DNV - Ambient and rating: Pollution degree 3; operating temp -40 to 60°C (derating above 60°C); operating a