OTC Tools & Equipment

Tie Rod Adjusting Tool for Full Size Cars Unique design permits 360º rotation of the adjusting sleeve, even where space is limited. 1/2” square drive allows use of ratchet or breaker bar. Includes: ...

Ford Transmission Quick Disconnect Coupler Tool Same as Ford T82l-9500 and Kent-Moore J-36391 7244

5-7/8" Bearing Splitter and Pulley Pulling Attachment 1-3/4 in.-5-7/8 in. spread. For use with OTC-1035, OTC-1035, OTC-1037, OTC-1038 and OTC-927. 679

Noid Lite- GM TBI Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector. Simplest method for eliminating the EFI system or idle air control...

PTU Linkshaft Seal And Dust Cover Installer Set This set installs linkshaft seals and dust covers found on the Power Transfer Unit (PTU). Similar to 205-883 and 205-882.. Applications include:...

Brake Caliper Pin/Bolt Remover Set Brake caliper pins allow the caliper to float on the rotor, but many times these become seized causing excessive brake pad and rotor wear. Brake Caliper Pin/Bolt...

Ford Caliper-pin Remover The damage-free way to remove brake caliper pins on 1986-88 Aerostars, Broncos and E- and F-series pickups; 1983-88 Rangers; and 1984-88 Bronco IIs. 7299

Ford Fuel Line Disconnect Tool Set Ford fuel line disconnect tool set consisting of one each (3/8” yellow) and(1/2” green) disc. tool. Wt., 2 oz.. These unique tools are used to easily disconnect the...

Pilot Bearing Puller Pilot Bearing Puller Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis. No. 7319 –...

Quick Coupler Adapter Socket For fuel injection testing 7342

Fuel Line Disconnect Tool Set This set works on quick connect fuel lines on Ford, GM, and Chrysler, and on the spring lock fuel line couplings on Ford’s popular PFI system.. Won’t damage fuel line or...

Digital Torque Wrench Displays torque in real time and at peak when torque is released. Sensitive enough to be used to measure bearing preload torque values. ¼” Drive, 36 tooth ratchet head. Range 1...