Mo-Clamp

3/8" x 8' Chain with Grab Hook 3/8 (9.53 mm) x 8' (2.44 m) Mo-Clamp Frame Straightening Chain with MCL-6210 Grab Hook. 6008

Pull Down Assembly For straight down or angled pulling. Works with pulling towers and bench systems. Large 5” wheel prevents undue chain wear. Secured with 1” heat-treated pin. Allows horizontal...

Down Pulley/Snap Block Assembly The Down Pulley Assembly #5810 is combined with the Block Pulley Adapter #5811. Perfect for horizontal pulls. Capacity: 5 ton. 5815

C Clamp Self-tightening. 1-1/2” throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge and original straight tooth design 0200

Jumbo G Clamp Mo-Clamp's Jumbo G Clamp has a throat opening of 7 inches to get over, around and behind the damage. Multiple holes allow for various angle pulls. Optional Shackle (#4059) means even...

Mo-Wedge High impact polycarbonate plastic. Great for spreading damaged body panels. Used with Mo-Block Dolly for straightening out the rail pocket. 5711

Mo-Block Dolly Straighten frame rails in about 80% of front-end damage cases. Inserted into the frame rail pocket, the dolly straightens the high strength, low-alloy metal easily and quickly. Dolly...

Hinge Plate Use in existing holes in frame structures or body panels. Comes with 3/8 Shackle (#5626) for angle pulls. 5623

Tower Chain Many different shop uses. Use in correction of strut towers; for attachment to existing bolt holes. Designed for use with 1/4 chain. 5622

Nut & Bolt Replacement Pack Most commonly used bolts, nuts, washers, and clevis pins. A diagram on the box helps you immediately locate the part you need. Mo-Clamp bolts have special grades of...

5/8" x 3" Bolt & Nut for 0300 5/8 x 3 Bolt & Nut For JR. 5350

9/16" x 3" Nut, Bolt & Washer 9/16' x 3 Nut, Bolt & Washer. 5200