Manufacturer Varies

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 5 mm, Material Stainless Steel, Material Grade/Class 316, Finish Plain, Thread Size M6x1.00,...

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 17 mm, Material Alloy Steel, Material Grade/Class Class 12.9, Finish Black Oxide, Thread Size...

Socket Head Cap Screw, Head Type Flanged Button, System of Measurement Metric, Drive Type Socket, Drive Size 5 mm, Material Alloy Steel, Material Grade/Class Class 10.9, Finish Zinc Plated, Thread...

Heat-Set Insert, Insert Type Heat-Set Insert, System of Measurement Inch, Insert Diameter 9/16 in, Overall Length 3/8 in, Thread Size 3/8 In.-24, Thread Direction Right Hand, Thread Type Fine,...

Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 5, Fastener Finish Plain, Dia./Thread Size 3/4 In.-10, Fastener Length 3 1/2 in, Fastener Thread Direction...

Disc Spring, Belleville, 302 Stainless Steel, Min Inside Dia 0.505 In, Max Outside Dia 1.000 In, Thickness 0.043 In, Overall Height 0.071 In, Load 250 Lbs, Deflection @ Load 0.014 In, Flat Load 431...

Thumb Screw, Type Thumb Screw, Finish Zinc-Plated, Material Steel, Thread Size 10-24, Fastener Length 3/4 in, Thread Length Not Applicable, Head Width 0.42 in, Head Height 0.48 in, Tensile Strength...

Carbon Steel Square Bar, Material Carbon Steel, Material Grade 1045, Thickness 2 in, Thickness Tolerance -0.006 in, Overall Length 12 in, Overall Width 2 in, Fabrication Cold Rolled, Heat Treatable...

Rubber Sheet, Sheet, Adhesive Type Plain Backing, Backing Type Non-Adhesive, Color Black, Durometer 70A, Grade Military, Material EPDM, Standards ASTM D2000 M4CA710, MIL-R-3065E, Maximum Temperature...

Inch, Structural Bolt, Steel, Material Grade A325 Type 1, Fastener Finish Hot Dipped Galvanized, Dia./Thread Size 5/8 In.-11, Fastener Length 2 1/2 in, Fastener Thread Type UNC (Coarse), Fastener...

Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 5/16 in, Material Steel, Finish Chrome Plated, Thread Size 3/8 In.-24, Minimum Thread Length 1 in,...

O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium...