Manufacturer Varies

Wing Nut, Material Steel, Material Grade/Class Grade 2, Finish Black Oxide, Thread Size 3/4 In.-10, Maximum Wing Span 2 15/16 in, Overall Height 1.188 in, Base Diameter 1 1/4 in, System of...

Clevis Pin,2 1/2 in L 5/16in dia,PK10, Product Type Adjustable Clevis Pin, Material Steel, Finish Zinc Plated, Material Grade/Class Ungraded, Head Type Headed, Head Diameter 27/64 in, Minimum Usable...

Jam Nut, Hex Type Jam Hex, Finish Black Oxide, Material Steel, Material Grade/Class Grade 5, Thread Size 1 1/8 In.-7, Hex Width 1 21/32 in, Hex Height 41/64 in, Dimensional Standards ASME B18.2.2,...

Taper Pin,#9,0.592 in dia,Steel, Thread Size Not Applicable, Pin Size #9, Large End Diameter 0.592 in, Small End Diameter 0.487 in, Pin Type Standard, Product Type Taper Pin, Material Steel, Material...

Fully Threaded Stud, Material Grade/Class Grade 2, Material Steel, Finish Black Oxide, Thread Size 1/4 In.-20, Overall Length 3/4 in, Tensile Strength 60,000 psi, System of Measurement Inch, Thread...

Flange Bolts, Dimensional Standards ASME B18.2.1, Drive Hex, Drive Size 5/8 in, Fastener Length 2 1/4 in, Finish Black Oxide, Flange Diameter 1 21/64 in, Flange Type Standard, Head Height 5/8 in,...

Utility Cart with Lipped & Flush Metal Shelves, Load Capacity 1,200 lb, Steel Material, 12 ga Gauge, Powder Coated Finish, Gray Color, Overall Length 54 in, Overall Width 24 in, Number of Shelves 2,...

Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Dia./Thread Size 5/16 In.-18, Fastener Length 2 3/4 in, Fastener Thread...

Black-Coated Steel Pipe Nipple, Application Air, Natural Gas, Oil, Potable Water, Steam, Finish/Coating Black Coated, Fitting Compatibility Schedule 40, Gravity Flow No, Inside Diameter 1 3/8 in,...

Machine Screw, Head Type Pan, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size M5x0.80, Fastener Length 40 mm, Head Width 9.5 mm, Head Height 3 mm, Drive Size Not Applicable, Tensile...

Cotter Pin,1.6mm dia,20mm L,PK100, System of Measurement Metric, Pin Diameter 1.6 mm, Pin Type Extended Prong, Material Steel, Material Grade/Class Ungraded, Finish Zinc Plated, Product Type Cotter...

Single Rod Pegboard Hook, Overall Length 1 3/4 in, Overall Width 1 in, 1 1/2 in For Pegboard Hole Spacing, For Pegboard Hole Size 3/8 in, Surface, Screw-In Locking System, Square For Pegboard Hole...