Manufacturer Varies

Retaining Ring,Internal,0.078 in Thk, System of Measurement Inch, Location Style Internal, Thickness 0.078 in, Fits Shaft Diameter Not Applicable, For Bore Diameter 2 7/16 in, Fits Groove Diameter 2...

Vertical Sheet Storage Rack, Steel, Powder Coated Decking Finish, Steel, Powder Coated Frame Finish, Load Capacity per Shelf/Bay 1,500 lb, Number of Shelves/Bays 4, Starter Unit, Whole Unit Load...

Film Tape, Tape Color Tan, Tape Brand TapeCase, Brand and Series TapeCase 204-5, Imperial Tape Length 36 yd, Imperial Tape Width 1 1/2 in, Imperial Tape WxL 1 1/2 in x 36 yd, Tape Thickness 6.5 mil,...

Modular Hose Bridge, Number of Channels 1, Cable Feed Style Lay Under, Connection Style Dog Bone, Channel Height 3 1/2 in, Channel Width 4 1/2 in, Load Capacity 8,000 lb/Axle, Material Polyurethane,...

Wash Bottle, Capacity - Metric 500 mL, Imprinting Isopropanol, Capacity - English 16 fl oz, Basic Material Plastic, Body Material LDPE, Vented/Nonvented Vented, Closure Material Polypropylene, Spout...

HDPE Bar, HDPE, Marine, Plastic Length 4 ft, Plastic Width 0.75 in, Plastic Thickness 0.75 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction...

90 Degrees Elbow, Stainless Steel, Electro Polished, 304, Class Class 3000, 2 in, Female, Threaded, 3 19/64 in, 2 in, Female, Threaded, 3 19/64 in, 2,570 psi @ 100 Degrees F Maximum Operating Pressure

Corrugated Pads, Wall Type Single Wall, Width 32 in, Length 48 in, Thickness 1/8 in, Board Test 32 ECT, Fluting Profile C Flute, Material Corrugated Cardboard, Color Brown, Post-Consumer...

High Temp/Voltage Lead Wire, Voltage 300V AC/DC, Conductor Material Silver-Plated Copper

Carbide Bur, End Type Pointed, Type Single, Shank Dia. 1/4 in, Head Dia. 3/4 in, Head Length 3/8 in, Included Angle 90 Degrees , Overall Length 2 1/8 in, Trade Number SK-7, Primary Material...

Carbide Bur Set, Type Double, Head Shape Ball, Cone, Cylinder, Flame, Inverted Cone, Oval, Tree, Head Diameter - Maximum 3/16 in, Head Diameter - Minimum 3/16 in, Number of Pieces 10, Primary...

Square End Mill, 0.125 in Milling Dia., Carbide, Uncoated, Non-Coolant Through, Straight, Length of 0.75 in, Overall Length 2 1/4 in, Shank Dia. 1/8 in, Neck Dia. Not Applicable Pack of 9