Manufacturer Varies

Standoff, Thread Size #4-40, Standoff Thread Gender Male-Female, Cap Head Height Not Applicable, Cap Head Diameter Not Applicable, Overall Length 2 in, Body Length 1 1/4 in, Thread Length 1 in, Body...

Dual Reducing Tee, Brass, Class Class 125, 1 1/4 in, Female, NPT, 12, 3/4 in, Female, NPT, 14, 1 in, Female, NPT, 12, 200 psi Maximum Operating Pressure

Spacer, Spacer Type Round, For Screw Size #6, Overall Length 5/16 in, Inside Diameter 0.14 in, Outside Diameter 0.25 in, Retaining Rib Diameter Not Applicable, Material Aluminum, Finish Plain, Pack...

Standard-Duty Clamp Coupling, Stainless Steel, 305 SST, Class 0 psi, 1 1/2 in, Female, 1 1/2 in, Female, Coupling, 0 psi Maximum Operating Pressure

Machine Screws, Head Type Cheese, Material Stainless Steel, Finish Plain, Drive Slotted, Thread Size M4x0.70, Fastener Length 14 mm, Head Width 7 mm, Head Height 2.6 mm, Drive Size Not Applicable,...

SEMS Screw, Head Type Pan, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size #8-32, Fastener Length 1/2 in, Head Width 0.322 in, Head Height 0.096 in, Drive Size #2, Tensile Strength...

SEMS Screw, Head Type Pan, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size #4-40, Fastener Length 1/2 in, Head Width 0.219 in, Head Height 0.068 in, Drive Size #1, Tensile Strength...

Floor Flange, 1 in Nominal Pipe Size, FNPT, 4 1/4 in Flange Outside Diameter, 4 1/4 in Overall Length, Red Brass, Class Class 125, 200 psi Maximum Operating Pressure, -20 Degrees to 400 Degrees F,...

90 Degrees Elbow Reducer, Brass, Class Class 125, 1 1/2 in, Female, NPT, 12, 3/4 in, Female, NPT, 14, 200 psi Maximum Operating Pressure

Machine Screws, Head Type Pan, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size M2.6x0.45, Fastener Length 5 mm, Head Width 5 mm, Head Height 1.5 mm, Drive Size Not Applicable, Tensile...

Recessed Square Plug, 1/2 in Nominal Pipe Size, Brass, Class Class 125, Male BSPT, 1/2 in Overall Length, -20 Degrees to 150 Degrees F, Includes Pre-Applied Thread Sealant No, Includes Seal No,...

90 Degrees Reducing Elbow, Malleable Iron, Not Applicable, ASTM A197, Class Class 150, For Pipe Schedule 40, 2 1/2 in, Female, NPT, 3 9/16 in, 8, 2 1/2 In.-8, 1 1/2 in, Female, NPT, 2 3/8 in, 11 1/2,...