Fasteners &

FENDER WASHERS ARE USED FOR APPLICATIONS INCLUDING AUTOMOTIVE ELECTRICAL PLUMBING AND MORE. WASHERS ARE DESIGNED FOR APPLICATIONS REQUIRING A LARGE DIAMETER FOR SURFACE LOAD REDUCTION.

FENDER WASHERS ARE USED FOR APPLICATIONS INCLUDING AUTOMOTIVE ELECTRICAL PLUMBING AND MORE. WASHERS ARE DESIGNED FOR APPLICATIONS REQUIRING A LARGE DIAMETER FOR SURFACE LOAD REDUCTION.

INSTALLATION DRIVE TOOL FOR USE WITH SLOTTED E-Z LOK INSERTS (METAL AND HARD WOOD) FITS IN STANDARD POWER DRILL.FOR USE WITH 1/4-20 1/4-28 AND M6 X 1.0 INSERTS.

THE CUP POINT DIGS INTO THE CONTACT SURFACE FOR MAXIMUM HOLDING POWER UNDER PRESSURE. THE KNURLED POINT FEATURES BETTER LOCKING POWER THAN THE STANDARD CUP POINT. THE KNURLED POINT COMBINES THE DIGGING ACTION OF THE CUP POINT WITH COUNTER-CLOCKWISE...

PHILLIPS PAN HEAD MACHINE SCREWS ARE USED FOR APPLICATIONS INCLUDING CONSTRUCTION INDUSTRIAL COMMERCIAL AND MORE. PHILLIPS PAN HEAD MACHINE SCREWS ARE MADE OF STEEL FOR LONG LASTING DURABILITY AND DEPENDABILITY. SCREWS ARE DESIGNED FOR PRE-TAPPED HOLE OR...

1/4-20 X 3"" PLAIN FINISH LOW CARBON FULLY THREADED STUD FULLY THREADED STUDS HAVE NO HEAD AND ARE THREADED ALONG THEIR ENTIRE LENGTH. USED IN METAL FABRICATION CONSTRUCTION APPLICATIONS AND MACHINERY REPAIRS TO FASTEN PARTS TOGETHER THAT REQUIRE...

THE CUP POINT DIGS INTO THE CONTACT SURFACE FOR MAXIMUM HOLDING POWER UNDER PRESSURE. THE KNURLED POINT FEATURES BETTER LOCKING POWER THAN THE STANDARD CUP POINT. THE KNURLED POINT COMBINES THE DIGGING ACTION OF THE CUP POINT WITH COUNTER-CLOCKWISE...

COMBINATION MUSHROOM HEAD TOGGLE BOLT - 1/4"" - 4"" LENGTH THIS 1/8"" FASTENER IS MADE OF ZINC FINISHED SOLID STEEL FOR LASTING STRENGTH AND DEPENDABILITY. COMBINATION PHILLIPS AND FLAT HEAD SCREW TOP DESIGN. PACKAGE QUANTITY OF 50.

1/4X4 HEX LAG SCREW ZINC GIMLET POINT. HEX HEAD SCREWS ARE DESIGNED TO BE DRIVEN BY A WRENCH OR PNEUMATIC TOOLS.

HAS A #3 DOME HEAD WHICH EXTENDS ITS LIFESPAN DURING HIGHER-WEAR APPLICATIONS LIKE WHEN SECURING GRADER BLADES PLOW EDGES OR STEEL CUTTING BLADES.

INSTALLATION DRIVE TOOL FOR USE WITH SLOTTED E-Z LOK INSERTS (METAL AND HARD WOOD) FITS IN STANDARD POWER DRILL.FOR USE WITH 10-24 10-32 AND M5 X 0.8 INSERTS.

FLAT HEAD SOCKET CAP SCREWS ARE USED FOR FLUSH MOUNTING OF SECTIONS USUALLY WHERE ONE PART SLIDES OVER ANOTHER PART OR ONE PART IS MOUNTED ON ANOTHER. FLAT HEAD SCREWS ARE LIMITED BY CONFIGURATION IN THEIR TENSILE STRENGTH CAPABILITY.