Fasteners &

TAPCON 1/4X4 CONCRETE ANCHOR PHILLIPS 25-PK THE ""ORIGINAL MASONRY"" ANCHOR THAT CUTS ITS OWN THREADS INTO CONCRETE BRICK OR BLOCK. MAXIMUM PERFORMANCE IS ACHIEVED BECAUSE THE TAPCON ANCHOR THE CONDRIVE INSTALLATION TOOL AND THE CARBIDE-TIPPED TAPCON...

LPST LEVELING MOUNTS SWIVEL 10-15 degrees TO ALL SIDES OF THE CENTERLINE TO ADJUST TO UNEVEN SURFACES USED FOR LEVELING MACHINE TOOLS ELECTRONIC RACKS BENCHES ETC. LARGE DIAMETER PAD DESIGN ASSURES SOLID SUPPORT. COUPLING NUT IS NOT RECOMMENDED TO USE...

LPST LEVELING MOUNTS SWIVEL 10-15 degrees TO ALL SIDES OF THE CENTERLINE TO ADJUST TO UNEVEN SURFACES USED FOR LEVELING MACHINE TOOLS ELECTRONIC RACKS BENCHES ETC. LARGE DIAMETER PAD DESIGN ASSURES SOLID SUPPORT. COUPLING NUT IS NOT RECOMMENDED TO USE...

LPST LEVELING MOUNTS SWIVEL 10-15 degrees TO ALL SIDES OF THE CENTERLINE TO ADJUST TO UNEVEN SURFACES USED FOR LEVELING MACHINE TOOLS ELECTRONIC RACKS BENCHES ETC. LARGE DIAMETER PAD DESIGN ASSURES SOLID SUPPORT. COUPLING NUT IS NOT RECOMMENDED TO USE...

THE STATIC LOAD RATING OF THESE FEET IS LIMITED DUE TO THE ACCEPTABLE LOAD RATING OF THE STUD (TENSILE STRENGTH 500/MM²). THE BENDING AND BUCKLING STRESS FACTORS OFTEN FOUND IN THE ACTUAL APPLICATION REDUCE THE LOAD RATING OF THE STUD AND MUST BE...

IDEAL FOR PRECISION WORK WITH CLOSE TOLERANCES AND APPLICATIONS NEEDING A WELL TOOLED APPEARANCE. SOCKET HEAD CAP SCREWS SUPPLY GREATER TENSILE STRENGTH THAN EQUIVALENT HEX HEAD CAPS SCREWS WHILE REQUIRING LESS SURFACE AREA TO COUNTERBORE.

M4-0.7 X 25 PHILLIPS PAN HEAD MACHINE SCREW 7985A Z/P PKG. 100 MACHINE SCREWS HAVE A UNIFORM DIAMETER THE ENTIRE LENGTH OF THE SHAFT AS OPPOSED TO TAPERED SCREWS WHICH HAVE A POINTED TIP. MACHINE SCREWS ARE TYPICALLY USED WITH A THREADED HOLE TO...

MACHINE SCREWS HAVE A UNIFORM DIAMETER THE ENTIRE LENGTH OF THE SHAFT AS OPPOSED TO TAPERED SCREWS WHICH HAVE A POINTED TIP. MACHINE SCREWS ARE TYPICALLY USED WITH A THREADED HOLE TO SECURE TWO PARTS TOGETHER. MACHINE SCREWS ARE FULLY THREADED FOR USE...

M8-1.25 X 30 MET PHL PAN HD MS 7985A PKG. 100 MACHINE SCREWS HAVE A UNIFORM DIAMETER THE ENTIRE LENGTH OF THE SHAFT AS OPPOSED TO TAPERED SCREWS WHICH HAVE A POINTED TIP. MACHINE SCREWS ARE TYPICALLY USED WITH A THREADED HOLE TO SECURE TWO PARTS...

M8-1.25 X 35 PHILLIPS PAN HEAD MACHINE SCREW 7985A PKG. 100 MACHINE SCREWS HAVE A UNIFORM DIAMETER THE ENTIRE LENGTH OF THE SHAFT AS OPPOSED TO TAPERED SCREWS WHICH HAVE A POINTED TIP. MACHINE SCREWS ARE TYPICALLY USED WITH A THREADED HOLE TO SECURE...

M8-1.25 X 40 PHILLIPS PAN HEAD MACHINE SCREW 7985A PKG. 100 MACHINE SCREWS HAVE A UNIFORM DIAMETER THE ENTIRE LENGTH OF THE SHAFT AS OPPOSED TO TAPERED SCREWS WHICH HAVE A POINTED TIP. MACHINE SCREWS ARE TYPICALLY USED WITH A THREADED HOLE TO SECURE...

MULTI-GRIP BLIND RIVET - 3/16 X 2-4 - DOME HEAD - .063 - .250 GRIP RANGE - ALUMINUM/STEEL - 250 PK A RIVET IS A CYLINDRICAL PERMANENT MECHANICAL FASTENER WITH A FORGED HEAD USED TO FASTEN TWO SEPARATE MATERIALS. GENERALLY MADE WITH A HEAD AT ONE END...