Fasteners &

#6 X 1-1/4"" DRYWALL SCREW - PHILLIPS BUGLE HEAD - STEEL - BLACK PHOSPHATE - SHARP POINT - 100 PK

9X1 1/2 PHILLIPS FLAT FULL BODY 2/3 THREAD WOOD SCREW BLACK OXIDE AND OIL. WOOD SCREWS PRODUCE A MATING THREAD WHEN ASSEMBLED INTO WOOD OR OTHER RESILIENT MATERIALS. FLAT HEAD SCREWS ARE USED WHEN PROTRUSION OF THE FASTENER ABOVE THE MATING SURFACE IS...

INSTALLATION DRIVE TOOL FOR USE WITH SLOTTED E-Z LOK INSERTS (METAL AND HARD WOOD) FITS IN STANDARD POWER DRILL.USED WITH 1/2-13 AND 1/2-20 INSERTS.

THE CUP POINT DIGS INTO THE CONTACT SURFACE FOR MAXIMUM HOLDING POWER UNDER PRESSURE. THE KNURLED POINT FEATURES BETTER LOCKING POWER THAN THE STANDARD CUP POINT. THE KNURLED POINT COMBINES THE DIGGING ACTION OF THE CUP POINT WITH COUNTER-CLOCKWISE...

1/4-20 X 3"" PLAIN FINISH LOW CARBON FULLY THREADED STUD FULLY THREADED STUDS HAVE NO HEAD AND ARE THREADED ALONG THEIR ENTIRE LENGTH. USED IN METAL FABRICATION CONSTRUCTION APPLICATIONS AND MACHINERY REPAIRS TO FASTEN PARTS TOGETHER THAT REQUIRE...

THE CUP POINT DIGS INTO THE CONTACT SURFACE FOR MAXIMUM HOLDING POWER UNDER PRESSURE. THE KNURLED POINT FEATURES BETTER LOCKING POWER THAN THE STANDARD CUP POINT. THE KNURLED POINT COMBINES THE DIGGING ACTION OF THE CUP POINT WITH COUNTER-CLOCKWISE...

INSTALLATION DRIVE TOOL FOR USE WITH SLOTTED E-Z LOK INSERTS (METAL AND HARD WOOD) FITS IN STANDARD POWER DRILL.FOR USE WITH 10-24 10-32 AND M5 X 0.8 INSERTS.

FLAT HEAD SOCKET CAP SCREWS ARE USED FOR FLUSH MOUNTING OF SECTIONS USUALLY WHERE ONE PART SLIDES OVER ANOTHER PART OR ONE PART IS MOUNTED ON ANOTHER. FLAT HEAD SCREWS ARE LIMITED BY CONFIGURATION IN THEIR TENSILE STRENGTH CAPABILITY.

FLAT HEAD SOCKET CAP SCREWS ARE USED FOR FLUSH MOUNTING OF SECTIONS USUALLY WHERE ONE PART SLIDES OVER ANOTHER PART OR ONE PART IS MOUNTED ON ANOTHER. FLAT HEAD SCREWS ARE LIMITED BY CONFIGURATION IN THEIR TENSILE STRENGTH CAPABILITY.

INSTALLATION DRIVE TOOL FOR USE WITH SLOTTED E-Z LOK INSERTS (METAL AND HARD WOOD) FITS IN STANDARD POWER DRILL.USED WITH 3/8-16 3/8-24 AND M10 X 1.5 SIZED INSERTS.

THE CUP POINT DIGS INTO THE CONTACT SURFACE FOR MAXIMUM HOLDING POWER UNDER PRESSURE. THE KNURLED POINT FEATURES BETTER LOCKING POWER THAN THE STANDARD CUP POINT. THE KNURLED POINT COMBINES THE DIGGING ACTION OF THE CUP POINT WITH COUNTER-CLOCKWISE...

DESIGNED FOR LIGHT DUTY APPLICATIONS SUCH AS SECURING GUARDS COVERS AND ORNAMENTAL FIXTURES. BUTTON HEADS PRESENT A PLEASING APPEARANCE TO AN ASSEMBLY.