Pumps and

Used for pitcher pump. Included in assembly is plunger rod, yoke, cup leather, poppet valve, and follower. 9 In. x 3 In. x 3 In.

Manufactured of TP plastic, noncorrosive, extra tough, 3/4 In. solid rubber gasket, zinc-plated steel bolts with captive nut feature.

Black heavy-duty polyethylene. Enhanced dimensional tolerances, partial turn secure lid safety feature, in place housing for self tapping screws, knockouts, discharge, power cord, and vent. Lid size: 19".

Radon dual-purpose vented liner. HDPE (High Density Polyethylene) construction. Water, odor and gas tight. Accommodates pedestal and submersible sump pumps. This sump liner is to be paired with item No. 1530ADLX vented sump lid to be radon safe.

Fits 1/2 HP convertible pump. Used with single pipe deep-well applications to 80' in 2" I.D. wells. Includes ejector and foot valve.

Heavy-duty diaphragm is designed for extended life. Maximum 100 psi pressure rating for residential use. Locking ring provides an airtight diaphragm seal for years of dependable service. High grade polypropylene liner is non-metallic for clean, fresh,...

Converts two pipe jet pumps to one single drop pipe for deep-well applications in 2" I.D. wells.

Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight...

Soft, pliable waterproof leathers for industrial and water system applications. The 711 waterproof is best suited for use on piston pumps, shallow setting brass cylinder barrels, air pumps, and other applications where minimum water absorption and...

Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight...

Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight...

Brady check valves are for use in nearly every water well/irrigation system imaginable. The main use is to prevent water pumps from losing their prime. This is the main cause of pump failure. They can be used in vacuum systems as well as any other...