Pipe

MP-6 medium bodied, medium set, multipurpose clear cement. Ideal for use on PVC, CPVC, and ABS pipe and fittings, Schedule 40 and 80, Types I and II, up to 6 inches. For pressure pipe, gas, conduit, drain waste, and Meets ASTM D-2564, D-2235, and F-493.

Silicone grease is a 90% pure silicone product which contains no petroleum additives and offers greater heat resistance, up to 450 deg. F., than lithium based greases. Nonstaining. Apply to rubber and synthetic O-rings. 1/2 fl. oz. cup in blister card.

O.D. tube size. 1 per card. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.

The quick and easy way to use plumber's putty when installing plumbing fixtures. Contains 1 paper backed roll plumbers putty 3/4 In. W. x 54 In. L. Ideal for setting plumbing fixtures, tubs, and sinks. Simply remove paper from portion being used. Use as...

All-purpose pipe cleaner can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures 40 deg. F. to 100 deg. F. Flows freely and evaporates quickly.

All-purpose purple primer designed to remove gloss, soften, and penetrate bonding surfaces of PVC and CPVC pipe and fittings. Highly recommended for use on high-gloss, hard finish bell end pipe or fittings. NSF certified, UPC listed. Meets ASTM F-656.

Do it Best clear PVC solvent cement is designed for use on PVC pressure pipe and fittings up to 4-inch diameter for Schedule 40 and 2-inch diameter for Schedule 80. This regular-bodied, fast-setting cement is NSF certified for use in potable water, sewer...

Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F. For use on PVC, ABS, CPVC, polypropylene, iron, or steel threads. Apply to clean Male threads and assemble the joint. Not for use...

Do it Faucet and Valve Grease is a waterproof grease that resists high temperatures. Apply to metal parts of faucets and valves. Use on hot water or steam to 350 F. 1 oz. tube.

1-1/4 oz. Pipe thread compound in stick form. Lubricates, seals, and prevents rust and corrosion. For pressures up to 5000 P.S.I., temperatures up to 750 deg. F. Use on metal or plastic pipe carrying air, water, steam, oil, gasoline, freon, ammonia,...

O.D. tube size. 1 per card. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.

Used with compression fitting on nylon and plastic hose. Insert is designed to strengthen nylon or polyethylene hose when tightening compression fitting. Packed 2 delrin sleeves and 2 brass inserts per card.