Drip

1/2 In. valve for use with 1/2 In. hose only. Compression inlet/outlet shutoff for 1/2 In. hose. Use to adjust or shutoff water flow. For water pressure up to 60 psi (pounds per square inch).

Compression tee used to establish branch circuits in drip irrigation systems.

Converts sprinkler risers to (2) 1/4 In. drip lines. Inlet: 1/2 In. FPT (female pipe thread). Outlet: 1/4 In. barbed tee. Dual port.

Hose plug. Closes off ends of hose and allows for flushing. For water pressure up to 60 psi (pounds per square inch). Closes ends of poly hose when frequent flushing is necessary.

Hose plug. Closes off ends of hose and allows for flushing. For water pressure up to 60 psi (pounds per square inch). Closes ends of poly hose when frequent flushing is necessary.

Used to make 90 degree turns in drip tubing. Can be used with water pressure up to 60 psi (pounds per square inch).

Fastens tubing to posts, beams, decks, patios, and stucco walls. Metal nail, plastic clamp.

Double-ended, double-duty plugs. Seal either large or small holes in 1/2 In., 5/8 In., or 0.710 In. hose.

Fits 1/2" and 3/4" risers. Converts 1/2" sprinkler riser to a 1/2" single drip manifold. Connects one 1/2" poly hose to a 1/2" sprinkler riser. Includes: Elbow, filter, 3-way connector, and 2 flow controls. 1 per card.

Holds 1/2, 5/8, or 0.710 In. lines in place. 12 In. long; 11-gauge steel. Easy-to-bend.

Used to punch holes in 1/2 In., 5/8 In., 0.710 In. hose to insert on-line drippers or 1/4 In. fittings. Handle features socket for installing and removing Micro Spray Jets.

Holds 1/2, 5/8, or 0.710 In. lines in place. 8 In. wire hook stakes pre-bent to hold lines in place easily. 15 stakes per bag.