Electrical

Molded non-metallic junction box. NEMA (National Electrical Manufacturers Association) 6P rating. Features foam-in-place gasket lid attached with stainless steel screws. and ideal for direct burial applications. Intended for indoor and outdoor use...

Schedule 40 non-metallic standard radius rigid elbow with belled end. Allows for a 90-degree change of direction in a run of conduit. Features a belled end to allow for easy joining of conduit.

Professional, preferred quality meter socket for 125A continuous 600V, 3-wire, single phase service. Outdoor, ringless, 4-jaw, overhead or underground service design with ground wire connector and horn bypass. High-quality G90 steel, polyester-coated...

Type NM-B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600 volts. PVC (polyvinyl chloride) jacket and PVC insulated, nylon...

Type NM-B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600 volts. PVC (polyvinyl chloride) jacket and PVC insulated, nylon...

Non-metallic, old work electrical box extension. Extends electrical box that is set too deep in the wall. Compatible with most single-gang or multi-gang wiring boxes. Ideal to use when remodeling. Snaps together quickly for multi-gang configurations...

QO neutral lug kit. For use with 12/2 aluminum or 14/4 copper wire. 70 amp. Should only be used with Square D QO convertible main load centers. Field installed for #12 to 2 Al or #14 to 4 Cu wire.

Type NM-B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600 volts. PVC (polyvinyl chloride) jacket and PVC insulated, nylon...

Homeline circuit breaker. Used for overload and short-circuit protection of electrical systems. Compatible with Homeline load centers and CSED devices. Rated for 120 volt/240 volt and 10,000 AIR. Designed exclusively for the residential market. ANSI...

Circular fixture box to install smoke detectors, ceiling fans and light fixtures. UL (Underwriter's Laboratories) listed.

Professional, preferred quality meter socket for 200A continuous 600V, 3-wire, single phase service. Outdoor, ringless, 4-jaw, overhead or underground service design with 2 ground wire connectors and horn bypass. High-quality G90 steel, polyester-coated...

Combines meter mounting and a circuit breaker distribution section in a rainproof enclosure. In addition to residential installations, the panel can also be used for rural service entrance, mobile homes, and for temporary power on construction sites...