Off-White HDPE Sheet Stock 48" L x 24" W x 0.188" Thick 1ZAR1

The ZORO SELECT - 1ZAR1 is a Sheet Stock, a type of plastic sheet that comes in various sizes and thicknesses. Made from HDPE material, this off-white plastic sheet is recognized for its potential adaptability and long-lasting properties. It's commonly used by industry professionals for fabricating parts or prototypes as it can be , shaped, or molded into different forms depending on the specific requirements of the project. Corrosion and Chemical Resistance: This plastic sheet is designed with the intention of resisting damage or degradation when exposed to certain corrosive substances, chemicals, or specific environmental conditions.Friction Coefficient & Rating: With a measured friction coefficient of 0.2 and classified as potentially slippery, this sheet may exhibit lower resistance when in contact with other surfaces.Impact Strength & Rating: The impact strength is recorded at 1.30 ft-lb/in; however it's rated poorly which could indicate lesser capacity for energy absorption prior to potential breakage under abrupt force.Machinability: Rated as fair which means it can be , shaped, or finished using industrial tools without causing significant damage to either the material or equipment.Temperature Range: Has been tested within temperature ranges between -58 Degrees F to 176 Degrees F while maintaining its structure.Tensile Strength & Rating: Measured tensile strength stands at approximately 4,600 psi; however it's rated poorly which might suggest reduced resilience upon stretching prior to possible breakageWater Absorption & Rating: Shows signs of significant water absorption resistance marked by an approximate weight increase of only about 0.01% after immersion in water over a specified duration