Manufacturer Varies Black HDPE Sheet Stock 12" L x 12" W x 0.125" Thick 1ZAU6

The ZORO SELECT - 1ZAU6 is a Sheet Stock plastic sheet, intended for use in a variety of industrial applications. This black HDPE (High-Density Polyethylene) material has been tested to resist corrosion, which may be beneficial for projects that require chemical resistance. With its standard grade classification, this sheet stock may be , shaped or molded to fit the needs of your project within its physical capabilities. Corrosion and Chemical Resistance: The plastic sheet has shown some level of resistance against certain corrosive substances and chemicals during testing.Friction Coefficient & Rating: It has a measured friction coefficient of 0.2 suggesting potential low frictional resistance; this could affect its performance where movement control is necessary.Impact Strength & Rating: The impact strength stands at 1.30 ft-lb/in but has a poor rating indicating that it may not withstand high force or shock without breaking.Machinability: Rated as fair, this indicates that the plastic sheet can be reasonably or shaped using industrial tools without causing significant damage to either the material or equipment.Temperature Range: The product's specified operating temperature range lies between -58 Degrees F to 176 Degrees F; it's expected to function within these limits but actual performance may vary based on conditions.Tensile Strength & Rating: Tensile strength was measured at approximately 4,600 psi during testing; however actual resilience under tensile stress may vary based on usage conditions.Nominal Size & Tolerance: The nominal size of the plastic sheet is 12 in W x 12 in L with length tolerance +/-0.250 in and thickness tolerance +/-10% allowing slight variations from specified measurements