Power Transmission

V-Belt Pulley, 3L Pitch Diameter Not Applicable, 3V Pitch Diameter Not Applicable, 3VX Pitch Diameter Not Applicable, 4L Pitch Diameter 7 in, 5L Pitch Diameter 7.4 in, 5V Pitch Diameter Not Applicable, 5VX Pitch Diameter Not Applicable, A Pitch Diameter...

White Lithium Grease with PTFE, Lithium with PTFE Base, Size 16 oz., Container Type Aerosol, NLGI Grade 2, Color White, Temp. Range 120 Degrees F, Flash Point Up to 0 Degrees F, Dropping Point 360 Degrees F, Four-Ball Wear 0.82mm, Specific Gravity 0.78...

Motor Start Capacitor, Motor Start Capacitor with Resistor, 220-250V AC, Microfarad Rating 161-193 MFD, Round, Case Height 3 3/8 in, Diameter 2 1/16 in

Motor Start Capacitor, Motor Start Capacitor with Resistor, 220-250V AC, Microfarad Rating 88-108 MFD, Round, Case Height 3 3/8 in, Diameter 1 13/16 in

Hydraulic Quick Connect Hose Coupling, Plug, 3000 Series, Steel, Coupling Size 3/8 in, Female, Max. Working Pressure @ 70 F 10,000 psi, Max. Flow Rate 22.71 lpm

Hydraulic Quick Connect Hose Coupling, Socket, 3000 Series, Steel, Coupling Size 3/8 in, Male, Max. Working Pressure @ 70 F 10,000 psi, Max. Flow Rate 22.71 lpm

Hydraulic Filter Element, Micron Rating 2, Filter Media - Filters Fiberglass, Max. Flow 10 gpm, Max. Pressure 3,000 psi, Primary Filter Removes Contaminants, Thread Size -, Seal Material Fluorocarbon

Cam Follower, Closure Double Sealed, Drive Type Slotted, Duty Type Standard, Face Design Screwdriver Slot, Overall Length 2 1/32 in, Roller Diameter 1 3/8 in, Roller Head Type Flat, Roller Material Alloy Steel, Roller Width 3/4 in, Rolling Element Rows...

Cam Follower, Closure Double Sealed, Drive Type Slotted, Duty Type Standard, Face Design Screwdriver Slot, Overall Length 1 21/32 in, Roller Diameter 1 in, Roller Head Type Flat, Roller Material Alloy Steel, Roller Width 5/8 in, Rolling Element Rows 1,...

WD-40 300012 General Purpose Dry Lubricant is a versatile, quick-drying lubricant designed to provide long-lasting lubrication with a clean, dry finish. It prevents sticking and reduces friction on metal and non-metal surfaces, making it suitable for...

Sleeve Coupling Insert, Coupling Size 5, Maximum Speed 7,600 RPM, Maximum Torque 312 in-lb, Outside Diameter 2 53/64 in, Insert Construction - New 1-Piece Solid, Angular Misalignment 1 Degrees , Horsepower @ 100 RPM 0.5 hp, Insert Material EPDM, Insert...

Sleeve Coupling Insert, Coupling Size 6, Maximum Speed 6,000 RPM, Maximum Torque 585 in-lb, Outside Diameter 3 3/4 in, Insert Construction 2-Piece with Retaining Ring, Angular Misalignment 1 Degrees , Horsepower @ 100 RPM 0.93 hp, Insert Material EPDM,...