IEC Magnetic Contactor, 1NC-1NO, 110V-120V AC, 3 P, Non-Reversing, Screw 3RT20361AK60

The SIEMENS IEC Magnetic Contactor is a 3-pole, non-reversing, electrically operated switching device rated for operation within specified electrical parameters. It is designed to operate with coils rated for 110-120 V AC and includes auxiliary contacts as specified. Part of the SIRIUS 3RT20 family (frame S2), compatible with DIN Rail or surface mounting methods as specified. - Coil voltage: 110-120 V AC - Poles / main contacts: 3 poles; 3 normally open main contacts - Auxiliary contacts: 2 total (1NO/1NC) included - Series/Frame: SIRIUS 3RT20, Frame Size S2 - Frequency: 50/60 Hz - Max voltage rating: rated for operation up to 690 V AC within the specified conditions - Full Load Amps: rated for full load currents of up to 52 A (Inductive) and 70 A (Resistive) under normal operating conditions - HP (phase/voltages): 120V single-phase 3 hp; 240V single-phase 10 hp; 208V/240V/480V/575V three-phase ratings (15 hp, 15 hp, 40 hp, 50 hp respectively) — rated according to industry standards at specified voltages and phases - Mechanical durability: tested for durability over 10,000,000 cycles under standard testing procedures - Operating temperature: designed for operation within this temperature range when installed properly - IP Rating: IP20 - Enclosure: No Enclosure - Mounting style: compatible with DIN Rail or surface mounting methods as specified - Dimensions: Height 5.65 in; Width 2.5 in; Depth 4.5 in - Terminal connection: Screw - Embedded surge suppressor: No - Mounting hole diameter: 0.20 in - Mounting hole spacing: Height 3.84 in; Width 1.77 in - Mounting position: Vertical