IEC Magnetic Contactor, 1NC-1NO, 120V AC, 3 P, Non-Reversing, Screw Clamp LC1D12G7

The product is a Schneider Electric IEC Magnetic Contactor (TeSys Deca), a three-pole, non-reversing, electrically operated switch. It uses a 120 V AC coil and features 1 normally open and 1 normally closed auxiliary contact (2 auxiliary contacts total). Rated for operation within specified motor control and resistive load circuit parameters, uses screw clamp terminals, and is rated up to 690 V AC / DC within specified conditions at 50/60 Hz. Has an IP20 enclosure rating; a protective cover is included. Key features - Type/series: IEC Magnetic Contactor, TeSys Deca - Action: Non-Reversing - Poles and main contacts: 3 poles; 3 NO main contacts - Auxiliary contacts: 2 total (1NO/1NC); Form: 1NC/1NO - Coil voltage: 120 V AC - Electrical connections: Screw Clamp Terminals - Enclosure/Protection: IP20; Protective Cover Included - Mounting: DIN Rail, Plate; Mounts On Plate, Rail - Dimensions and weight: Depth 3.38 in; Height 3.03 in; Width 1.77 in; Net weight 0.325 kg - Electrical rating: Rated for operation up to 690 V AC / DC within specified conditions; Frequency 50/60 Hz; Phase Three - Load capability: Supports loads up to the specified current ratings under normal operating conditions; Rated Making Capacity 250 A @ 440 V (Power Circuit), 140 A (AC Signalling), 250 A (DC Signalling) - Operating characteristics: Typical operating times based on standard testing procedures - Other electrical data: Inrush 70 VA; Hold 7.5 VA; Insulation resistance >10 MΩ (Signalling Circuit)