Dayton IEC Magnetic Contactor, 1NO, 24V AC, 3 P, Non-Reversing 6EAV5

The DAYTON IEC Magnetic Contactor is an IEC-style, 3-pole switching device rated for operation with a 24 V AC coil. It features non-reversing operation and includes 1 normally open auxiliary contact. The unit does not include an embedded surge suppressor or enclosure; overall dimensions are approximately 3.4 inches (depth) x 1.81 inches (height) x 1.81 inches (width). Specifications: - Embedded Surge Suppressor: This product does not include an embedded surge suppressor; verify suitability for your application accordingly. - Enclosure: This product does not include an enclosure; ensure proper installation to meet safety requirements as applicable to your environment. - Frequency: Rated for operation within approximately 50–60 Hz. - Full Load Amps - Inductive: Rated for use at currents up to specified full load amps under typical conditions; actual performance may vary based on application specifics. - Full Load Amps - Resistive: Rated for use at currents up to specified full load amps under typical conditions; actual performance may vary based on application specifics. - Full Load Current - Inductive: Rated for use at currents up to specified full load amps under typical conditions; actual performance may vary based on application specifics. - Full Load Current - Resistive: Rated for use at currents up to specified full load amps under typical conditions; actual performance may vary based on application specifics. - HP @ 1 Phase - 120V: 1 hp - HP @ 1 Phase - 230V: 3 hp - HP @ 1 Phase - 240V: 3 hp - HP @ 3 Phase - 208V: 5 hp - HP @ 3 Phase - 240V: 5 hp - HP @ 3 Phase - 480V: 10 hp - HP @ 3 Phase - 575V: 15 hp - Height: 1.81 in - Width: 1.81 in - Depth: 3.4 in - Reversing Capability: Non-Reversing - Standards: CSA, UL Listed - Item: IEC Magnetic Contactor - Number of Auxiliary Contacts: 1